DC-SWAT Forum

Полная версия: Bios pin 35 - alternative place to connect?
Вы просматриваете yпpощеннyю веpсию форума. Пеpейти к полной веpсии.

segadreamcaster

Hi again,

Ok, this one is a long shot, but I damaged a dreamcast mobo when I initally attempted the bios upgrade and am now unable to attach pin 35 as the board there is too damaged.

Does anybody know if there is an alternative palce on the board I could attach a wire to?

Thanks again

Cheers
the same problem with pin 22

segadreamcaster

(05.05.2012 21:37)Gromber писал(а): [ -> ]the same problem with pin 22

Ah, I feel your pain....with any luck someone might have a solution Smile

segadreamcaster

Well, I found the solution to my problem anyway

With the help of this photo:

I was able to trace pin 35 which has another link under the chip (as you can see in the photo) to the other side of the board and then connect a wire...and bingo...working again Smile

Unfortunately Gromber, I can't see an obvious solution for you as there is no visual trace of leg 22 on the picture Sad

Goodluck with solving your problem
can you post any image of the mod of pin 35? thanks.

segadreamcaster

(07.05.2012 22:43)Gromber писал(а): [ -> ]can you post any image of the mod of pin 35? thanks.

Well, here are two images of where I needed to attach pin 35 to. I did it by carefully matching up the terminal pattersn on each side of the board. It would have been easier to poke a tiny piece of wire through but that would have meant removing the chips entirely Sad

[attachment=123][attachment=124]
thanks for the info.

segadreamcaster

(08.05.2012 03:52)Gromber писал(а): [ -> ]thanks for the info.

No problem, I hope it helps you in some way....goodluck Smile
URL ссылки