Hi all,
I was wondering if it is possible to change the color of the swirl / logo without changing the region. I'd like to change my orange swirl to blue, but keep my console NTSC-U
Thanks
Only by hack the BIOS code.
I was reading how to do this, and i found this
Цитата:Region change for dc_flash.bin:
When you go to pos. 0x1A002, with an Hex editor, you can change it to:
0x30: Japan region (NTSC, Orange swirl),
0x31: USA region (NTSC, Orange swirl),
0x32: Euro (Pal, Blue swirl)
Found this somewhere.
Could you give more info on how to change the swirl/logo color without changing the region? Is that possible using dreamshell? I only want to do this once using your guide here
http://www.dc-swat.ru/blog/hardware/1082.html#cut
Thanks for any help
This info about change region and by it changed swirl color.
If you like change only color, need research the BIOS firmware and change some code. I don't know where you can do it, because not research this place.