DC-SWAT Forum

(16.11.2021 12:57)Toe-Knee писал(а): [ -> ]https://mega.nz/file/SXAUxBgA#NQnD9BO0nF...HcDURx5Ghk
Video of re2 working.

How do I check for lba28?

Test with loader 6.0 and see if resident 2 will work.

(17.11.2021 01:53)aldair писал(а): [ -> ]Test with loader 6.0 and see if resident 2 will work.

0.7.0 don't work with LBA28, then this adapter support LBA48

(16.11.2021 19:24)megavolt85 писал(а): [ -> ]

(16.11.2021 15:45)Toe-Knee писал(а): [ -> ]https://mega.nz/file/yepElaiZ#7Oowmc49oe...Y1I7iiPflo

please test Metropolis Street Racer and Ooga Boga

Metropolis Street Racer works fine.

I don't seem to have Ooga boga on this card so I'll look for that after work to test.

(16.11.2021 19:24)megavolt85 писал(а): [ -> ]

(16.11.2021 15:45)Toe-Knee писал(а): [ -> ]https://mega.nz/file/yepElaiZ#7Oowmc49oe...Y1I7iiPflo

please test Metropolis Street Racer and Ooga Boga

I cant get ooga booga to run using dragoncity settings of

Ooga Booga OK US OPT DMA TRUE 14 Rebuilded GDI's / Need VMU for tutorial !

Do you have any recomendations? It just boots to a black screen.

Do you have boot the echelon version @megavolt85 share here via his gdi list ?

(17.11.2021 22:35)fafadou писал(а): [ -> ]Do you have boot the echelon version @megavolt85 share here via his gdi list ?

Yeah that's the one I tried. I've tried all 14 loaders and memory addresses and it starts to boot then black screen.

(18.11.2021 01:18)Toe-Knee писал(а): [ -> ]

(17.11.2021 22:35)fafadou писал(а): [ -> ]Do you have boot the echelon version @megavolt85 share here via his gdi list ?

Yeah that's the one I tried. I've tried all 14 loaders and memory addresses and it starts to boot then black screen.

In my memories it boots only with 0.6.11_se loader with default memory and true DMA.
During the boot you have to see a pirate screen made by echelon and must press start or the good button to avoid the black screen.

In order to be sure you can have the true dma with your setup, try the same config with NBA2K2. It should boot.

I do not understand why it doesn't run with 0.7.0 that needed unfragmented datas, run with 0.6.11_se that tolerate few fragmented datas... I believe it's due to lba28 or 48. 0.7.0 is better with IDE hdd. It's really strange for me.

Other odd issue NBA2K boot only with ide hdd and 0.7.0 loader.

(18.11.2021 15:44)fafadou писал(а): [ -> ]

(18.11.2021 01:18)Toe-Knee писал(а): [ -> ]

(17.11.2021 22:35)fafadou писал(а): [ -> ]Do you have boot the echelon version @megavolt85 share here via his gdi list ?

Yeah that's the one I tried. I've tried all 14 loaders and memory addresses and it starts to boot then black screen.

In my memories it boots only with 0.6.11_se loader with default memory and true DMA.
During the boot you have to see a pirate screen made by echelon and must press start or the good button to avoid the black screen.

In order to be sure you can have the true dma with your setup, try the same config with NBA2K2. It should boot.

I do not understand why it doesn't run with 0.7.0 that needed unfragmented datas, run with 0.6.11_se that tolerate few fragmented datas... I believe it's due to lba28 or 48. 0.7.0 is better with IDE hdd. It's really strange for me.

Other odd issue NBA2K boot only with ide hdd and 0.7.0 loader.

Just checked it with the settings you said and it worked first time. I'm sure i went through them all yesterday.

(16.11.2021 15:45)Toe-Knee писал(а): [ -> ]https://mega.nz/file/yepElaiZ#7Oowmc49oe...Y1I7iiPflo

In your video it doesn't show the cf-sd running as in the video below:

Here you go.

https://mega.nz/file/HXh02IoY#NB3Bv1KciA...HOIF_35ryA