+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: Sega Dreamcast (/forum-2.html)
+--- Форум: English section (/forum-29.html)
+--- Тема: Region Change on Pal consoles with bios mod ? (/thread-1603.html)
Region Change on Pal consoles with bios mod ? - Elbarto0 - 01.05.2011 00:53
hey
i have a pal konsol dreamcast ^^ and i installed a sd mod works great. and soldered a bios mod works ok but not right i think. when i start the console in the bios mod mode without the dreamshell cd the window is in the middel and some crap lines and not correct on screan. when i linked the r422 point then i have a correct windows .
i linket the point r512 and 12v to chance the region it dont work
i start the dc with the dreamshell cd i can chance the region i start the dc without the dreamshell cd (bios mode ) the region chance dont have ticks and when i tick some on, press write nothing happens. why ??
is the chip not soldering correct ?.
hope you can help me thanks allot.
RE: Region Change on Pal consoles with bios mod ? - SWAT - 01.05.2011 09:17
Bad English, I do not understand you.
Are you sure you did bios mod? You're talking about Region Changer, but it does not apply to bios mod.
RE: Region Change on Pal consoles with bios mod ? - Elbarto0 - 01.05.2011 18:53
With my Pal console I've made a bios mod. Dream Shell installed there. When I use the Bios Mod Run the image is distorted.
What can I do?
I tried to change the region but this is only on the original Dreamcast Rome and not correct on the Dreamshell?
RE: Region Change on Pal consoles with bios mod ? - SWAT - 01.05.2011 19:56
You selected 60hz at startup? Try without this.