DC-SWAT Forum
DreamShell 4.0 RC 2 Error! - Версия для печати

+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: Sega Dreamcast (/forum-2.html)
+--- Форум: English section (/forum-29.html)
+--- Тема: DreamShell 4.0 RC 2 Error! (/thread-2172.html)



DreamShell 4.0 RC 2 Error! - dave_van_damn - 26.08.2014 19:01

I've been trying to load DreamShell 4.0 RC 2 but I can't get to the main menu when my SD reader is plugged in. Instead I get the following error -

DS_ERROR: Can't load module /sd/DS/apps/main/modules/app.klf
DS_ERROR: Can't load app 'Main' with id = 44
DS_ERROR: Can't open Main app

How can I fix this problem?

Thanks Smile


RE: DreamShell 4.0 RC 2 Error! - SWAT - 26.08.2014 19:58

You boot from...?
On SD Card you have DS resource files?


RE: DreamShell 4.0 RC 2 Error! - dave_van_damn - 27.08.2014 16:21

(26.08.2014 19:58)SWAT писал(а):  You boot from...?
On SD Card you have DS resource files?

Boot from SD.

Yes I have DS files. Version 4.0.0 RC1 runs fine, but not RC2.


RE: DreamShell 4.0 RC 2 Error! - aldair - 27.08.2014 16:37

(27.08.2014 16:21)dave_van_damn писал(а):  
(26.08.2014 19:58)SWAT писал(а):  You boot from...?
On SD Card you have DS resource files?

Boot from SD.

Yes I have DS files. Version 4.0.0 RC1 runs fine, but not RC2.
Your SD Card is Chinese? Redo all the wiring.
As in the tutorial below: http://www.dc-swat.ru/forum/thread-2063.html

[Изображение: uIFzyCGs.jpg]
http://i.imgur.com/uIFzyCG.jpg


RE: DreamShell 4.0 RC 2 Error! - dave_van_damn - 27.08.2014 18:02

Oh! Wow, that sucks. Yes it's Chinese.

Why does it need to be re-wired??


RE: DreamShell 4.0 RC 2 Error! - SWAT - 27.08.2014 20:26

I mean your initial boot. From GD-drive or you have BIOS mod?
Which the disc or the BIOS firmware you use?


RE: DreamShell 4.0 RC 2 Error! - dave_van_damn - 28.08.2014 03:42

(27.08.2014 20:26)SWAT писал(а):  I mean your initial boot. From GD-drive or you have BIOS mod?
Which the disc or the BIOS firmware you use?

I boot from GD-drive using disc 4.0 RC 2.

If I use 4.0 RC 1 it will boot and I can use DreamShell, but RC 2 has the error.


RE: DreamShell 4.0 RC 2 Error! - SWAT - 28.08.2014 06:43

Seems the SD card is detected (because it's used as a path for resources), but can't be read data from it.
As aldair say, need redo all wiring.


RE: DreamShell 4.0 RC 2 Error! - dave_van_damn - 28.08.2014 15:20

(28.08.2014 06:43)SWAT писал(а):  Seems the SD card is detected (because it's used as a path for resources), but can't be read data from it.
As aldair say, need redo all wiring.

Do all Chinese SD cards have this problem? Are they wired incorrectly? Or just a bad contact?


RE: DreamShell 4.0 RC 2 Error! - SWAT - 28.08.2014 17:32

You have adapter with wires or as dongle to serial port?


RE: DreamShell 4.0 RC 2 Error! - dave_van_damn - 29.08.2014 10:50

(28.08.2014 17:32)SWAT писал(а):  You have adapter with wires or as dongle to serial port?

dongle


RE: DreamShell 4.0 RC 2 Error! - SWAT - 29.08.2014 12:35

It's strange, the problems can be with wired adapter, with dongle should not be...


RE: DreamShell 4.0 RC 2 Error! - aldair - 29.08.2014 18:11

(29.08.2014 12:35)SWAT писал(а):  It's strange, the problems can be with wired adapter, with dongle should not be...
Are the Chinese dongles need to do a review with new wires.


RE: DreamShell 4.0 RC 2 Error! - ScrivaniBrazil - 05.09.2014 22:47

I use a MicroSD card with an adapter for SD size. I was having this same problem, intermittently, until I realized that the pins of the SD adapter were dirty. After cleaning, I'm having no more problems.


RE: DreamShell 4.0 RC 2 Error! - SWAT - 06.09.2014 16:24

Some microSD->SD adapters have bad contact at microSD connection.