+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: Sega Dreamcast (/forum-2.html)
+--- Форум: English section (/forum-29.html)
+--- Тема: Change swirl color without changing region? (/thread-2326.html)
Change swirl color without changing region? - b0xybr0wn_0 - 28.09.2015 10:16
Hi all,
I was wondering if it is possible to change the color of the swirl / logo without changing the region. I'd like to change my orange swirl to blue, but keep my console NTSC-U
Thanks
RE: Change swirl color without changing region? - SWAT - 28.09.2015 16:06
Only by hack the BIOS code.
RE: Change swirl color without changing region? - b0xybr0wn_0 - 18.10.2015 02:53
I was reading how to do this, and i found this
Цитата:Region change for dc_flash.bin:
When you go to pos. 0x1A002, with an Hex editor, you can change it to:
0x30: Japan region (NTSC, Orange swirl),
0x31: USA region (NTSC, Orange swirl),
0x32: Euro (Pal, Blue swirl)
Found this somewhere.
Could you give more info on how to change the swirl/logo color without changing the region? Is that possible using dreamshell? I only want to do this once using your guide here http://www.dc-swat.ru/blog/hardware/1082.html#cut
Thanks for any help
RE: Change swirl color without changing region? - SWAT - 19.10.2015 09:48
This info about change region and by it changed swirl color.
If you like change only color, need research the BIOS firmware and change some code. I don't know where you can do it, because not research this place.