(31.08.2016 23:37)FACE666 писал(а):  can anyone please help me?i need to know what type of fuse and here to get it.the fuse is on D604 position on the main board(near the controllers board) and have a N9 writing.tks

(01.09.2016 08:20)Gillbert писал(а):  

(31.08.2016 23:37)FACE666 писал(а):  can anyone please help me?i need to know what type of fuse and here to get it.the fuse is on D604 position on the main board(near the controllers board) and have a N9 writing.tks

Are you referring to D604 part? It's not a fuse, it's a diode (a double diode to be more precise).
On the DC board, fuses are identified as "FL".

(01.09.2016 11:16)FACE666 писал(а):  that it.tks.can you please tell me if its possible to switch and for what kind of diode?because my board dont give image or sound and a make a jumper and the console works,now i need to replace the D604.

(04.09.2016 22:28)Gillbert писал(а):  

(01.09.2016 11:16)FACE666 писал(а):  that it.tks.can you please tell me if its possible to switch and for what kind of diode?because my board dont give image or sound and a make a jumper and the console works,now i need to replace the D604.

I have a spare DC mobo here and took some measures on D604 with a multimeter.

I found that is a double Schottky diode, here's the datasheet of it:
https://toshiba.semicon-storage.com/info/docget.jsp?did=3349&prodName=1SS374

I also found a place where you can buy it:
http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20160904102304&SearchText=1SS374

Anyway, this diode is part of the FAN tachometer circuit, it's possible to bypass it by using a jumper like you did, but of course the DC will lose its thermal protection, so it's better to the right thing.