DC-SWAT Forum
ide device not loaded. - Версия для печати

+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: DreamShell (/forum-3.html)
+--- Форум: General Discussion (/forum-27.html)
+--- Тема: ide device not loaded. (/thread-2581.html)

Страниц: 1 2


ide device not loaded. - news8019 - 20.03.2017 22:59

I have a problem with mod.IDE to my dream. I think the connections are welded well, because he says that identifies a device. the problem and who do not want to recognize, but do not understand the problem.
Post a picture of the starting dreamshell to better understand the problem.
Thank you for the answer.


RE: ide device not loaded. - Gillbert - 21.03.2017 00:17

Are you pretty sure that you soldered every wire in the correct points?

Post some pics of your mod, please.


RE: ide device not loaded. - news8019 - 21.03.2017 01:18

Thank you for the reply. I enclose a photo, I hope to see well.


RE: ide device not loaded. - Gillbert - 21.03.2017 01:29

It seems fine as far I can see.

But I could not see where the end of the wires are connected to. Did you wired them to an IDE connector? Are you using some SATA adapter? More details.


RE: ide device not loaded. - SWAT - 21.03.2017 07:13

What IDE devce? Try another and without *smart* adapters.


RE: ide device not loaded. - news8019 - 21.03.2017 11:26

you, use an SD adapter, I just purchased a hd that arrives in a few days.
It is the version with 44 pins with hd 2.5


RE: ide device not loaded. - SWAT - 21.03.2017 14:43

Problem in adapter.


RE: ide device not loaded. - news8019 - 21.03.2017 15:58

sure? so with a true hd I solve my problem.
I update the discussion, just get me the hard drive


RE: ide device not loaded. - megavolt85 - 21.03.2017 18:05

SD2IDE don't work with dreamcast


RE: ide device not loaded. - news8019 - 21.03.2017 21:39

I hope with all my heart is that the problem
Thanks for all the answers


RE: ide device not loaded. - Gillbert - 22.03.2017 00:02

Problem with that adapter is because there is no jumper to change to SLAVE mode.


RE: ide device not loaded. - SWAT - 22.03.2017 10:28

(21.03.2017 18:05)megavolt85 писал(а):  SD2IDE don't work with dreamcast

Some works, some not.


RE: ide device not loaded. - news8019 - 22.03.2017 17:01

Arrived now the hard disk, do not boot from HD, and even from sd.


RE: ide device not loaded. - megavolt85 - 22.03.2017 22:20

you use 80 wire ide cable?


RE: ide device not loaded. - news8019 - 22.03.2017 22:31

No, of course not. 44 wires


RE: ide device not loaded. - megavolt85 - 22.03.2017 22:37

gdrom install'ed?


RE: ide device not loaded. - news8019 - 22.03.2017 22:40

gd-rom is installed, and the console is assembled.


RE: ide device not loaded. - megavolt85 - 22.03.2017 22:57

i look on photo error when driver set DMA mode
need photo your G1ATA mod


RE: ide device not loaded. - news8019 - 22.03.2017 23:51

Now I do not have on hand, I can just upgrade to photograph the area G1ATA


RE: ide device not loaded. - Gillbert - 23.03.2017 00:15

Did you wired the pin 44 to Ground? If not, do it, pin 44 must be in low state.