DC-SWAT Forum
ISO Loader 0.7.x Beta - Версия для печати

+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: DreamShell (/forum-3.html)
+--- Форум: General Discussion (/forum-27.html)
+--- Тема: ISO Loader 0.7.x Beta (/thread-3525.html)

Страниц: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

RE: ISO Loader 0.7.x Beta - dragoncity - 19.02.2019 20:11

Yes.. I told you just before o_O

I repeat :

GD-IDE
CF/IDE/SSD

GD-IDE "without ds bios,so with sega bios"
CF/IDE/SSD

But GAME doesn't work like Ooga Booga ! Angel

RE: ISO Loader 0.7.x Beta - EduardoKmus - 20.02.2019 01:12

This charger is a real wonder. I have a question, I am playing from a TV-NTSC (CRT), and I have noticed that both Soulcalibur and RE2 work well but at 50hz, it is not compatible with my TV and it flashes as if it were a PAL game. And I'm using GDI-Optimized NTSC-U. Can anybody help me?

-------------------------------------------------------------------------------
My Dreamcast Youtube Channel:
https://www.youtube.com/c/KmusDCRetroArcade?sub_confirmation=1

RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 20.02.2019 01:37

I have noticed that too. If I run Carrier with the 0.6.0 loader it is 60 hz by default, but if I launch it with the new loader it starts at 50 and shows a 50/60 prompt later on. some US games are locked to 50hz too, namely Sonic Shuffle, but others run at 60 hz, like Ooga Booga

RE: ISO Loader 0.7.x Beta - dragoncity - 20.02.2019 01:47

@MilkeyWilkey
Can you test last DS with 0.7x "IGR" ?

So DL my last DS and create "IGR\DS_CORE.BIN" in your HDD.
http://dreamshell.infos.st/

If you have an SD MOD it's better and you can put DS folder inside,better stabitily and preset work.

And tell me if Ooga Booga work with this 0.7x "IGR" (8.bin)

Thanks in advance Smile

RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 20.02.2019 02:06

(20.02.2019 01:47)dragoncity писал(а):  @MilkeyWilkey
Can you test last DS with 0.7x "IGR" ?

So DL my last DS and create "IGR\DS_CORE.BIN" in your HDD.
http://dreamshell.infos.st/

If you have an SD MOD it's better and you can put DS folder inside,better stabitily and preset work.

And tell me if Ooga Booga work with this 0.7x "IGR" (8.bin)

Thanks in advance Smile

I hope I did everything right)
-removed DS from IDE
-placed DS_CORE.bin from your archive to HDD IGR\DS_CORE.bin
-placed your DS folder on SD

it works

RE: ISO Loader 0.7.x Beta - dragoncity - 20.02.2019 02:07

Ok so you have also an SD MOD ? So it's better for you now Smile

And it works..my god...very crazy ^^
Do you have SATA for test ?

IDE for me it's not the future,and some games when I tested doesn't work (I don't remember..).

The best for me is SSD,many game work with SSD,and very silent.

SATA some games like Soul Calibur doesn't work (maybe now it's ok),and with SSD work !

CF too expensive..!!!

RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 20.02.2019 02:13

I don't have SATA adapter.

RE: ISO Loader 0.7.x Beta - fafadou - 20.02.2019 12:25

(20.02.2019 01:12)EduardoKmus писал(а):  This charger is a real wonder. I have a question, I am playing from a TV-NTSC (CRT), and I have noticed that both Soulcalibur and RE2 work well but at 50hz, it is not compatible with my TV and it flashes as if it were a PAL game. And I'm using GDI-Optimized NTSC-U. Can anybody help me?
If your TV have vga use it, you'll have a bery better result.

@dragoncity : have you try in rgb too or/and without your akura box ? But those US games have vga...

RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 20.02.2019 12:31

(20.02.2019 12:25)fafadou писал(а):  If your TV have vga use it, you'll have a bery better result.

I have the same problem but I like to play it on my CRT and it does not have VGA.

(20.02.2019 12:25)fafadou писал(а):  @dragoncity : have you try in rgb too or/and without your akura box ? But those US games have vga...

Ooga Booga worked in VGA for me so it's probably not the case

RE: ISO Loader 0.7.x Beta - dragoncity - 20.02.2019 12:53

Yes I tested in RGB too Smile

But normally it's the other way around, here are the games that don't work in RGB with Dreamshell ! Wink

Centipede
ESPN NBA 2 Night
Geist Force
Jet Coaster Dream 2
Morita no Saikyou Reversi
Pop'n Music
Pop'n Music 2
Shanghai Dynasty
Sydney 2000

RE: ISO Loader 0.7.x Beta - megavolt85 - 20.02.2019 15:17

(20.02.2019 01:12)EduardoKmus писал(а):  I am playing from a TV-NTSC (CRT), and I have noticed that both Soulcalibur and RE2 work well but at 50hz, it is not compatible with my TV and it flashes as if it were a PAL game.

(20.02.2019 01:37)MilkeyWilkey писал(а):  I have noticed that too. If I run Carrier with the 0.6.0 loader it is 60 hz by default, but if I launch it with the new loader it starts at 50 and shows a 50/60 prompt later on. some US games are locked to 50hz too, namely Sonic Shuffle, but others run at 60 hz, like Ooga Booga

you can check it with loader from dragoncity pack Wink

man's who test run from IP.BIN? set checkbox IP.BIN, set loader adress 0x8ce00000 and run game

RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 20.02.2019 15:45

(20.02.2019 15:17)megavolt85 писал(а):  man's who test run from IP.BIN? set checkbox IP.BIN, set loader adress 0x8ce00000 and run game

nope, still 50hz

RE: ISO Loader 0.7.x Beta - megavolt85 - 20.02.2019 16:09

run from IP.BIN it's feature

for 60Hz need test loader from dragoncity pack, it's new loader

RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 20.02.2019 16:25

am I doing something wrong?
load from dragoncity pack
set loader device 8
IP.bin, loader address 0x8ce00000
still gives me 50hz

RE: ISO Loader 0.7.x Beta - megavolt85 - 20.02.2019 17:38

what is region your console?

RE: ISO Loader 0.7.x Beta - RazorX2018 - 20.02.2019 17:55

for the hex values on page 1 for pso:
track03.iso
найти / find
12D111D0 02621942
заменить / replace
09000900 0B000900

am i searching for all 12D111D0 and replacing it with 02621942 then searching for all 09000900 and replacing it with 0B000900?
is that right and if so what's it achieve?

RE: ISO Loader 0.7.x Beta - dragoncity - 20.02.2019 17:57

(20.02.2019 16:25)MilkeyWilkey писал(а):  am I doing something wrong?
load from dragoncity pack
set loader device 8
IP.bin, loader address 0x8ce00000
still gives me 50hz

Try with this loader :
https://www57.zippyshare.com/v/CqXX1sKj/file.html
I remember you solder R422..

[Изображение: va0-fix-60hz.jpg]

RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 20.02.2019 18:02

(20.02.2019 17:38)megavolt85 писал(а):  what is region your console?

Pal modded to pal60. In region changer USA NTSC English

RE: ISO Loader 0.7.x Beta - pcwzrd13 - 20.02.2019 18:09

(20.02.2019 17:55)RazorX2018 писал(а):  for the hex values on page 1 for pso:
track03.iso
найти / find
12D111D0 02621942
заменить / replace
09000900 0B000900

am i searching for all 12D111D0 and replacing it with 02621942 then searching for all 09000900 and replacing it with 0B000900?
is that right and if so what's it achieve?

You're replacing "12D111D0 02621942" with "09000900 0B000900". It's to remove the BIOS protection from the game. It will not boot without this edit.

RE: ISO Loader 0.7.x Beta - RazorX2018 - 20.02.2019 18:18

(20.02.2019 18:09)pcwzrd13 писал(а):  
(20.02.2019 17:55)RazorX2018 писал(а):  for the hex values on page 1 for pso:
track03.iso
найти / find
12D111D0 02621942
заменить / replace
09000900 0B000900

am i searching for all 12D111D0 and replacing it with 02621942 then searching for all 09000900 and replacing it with 0B000900?
is that right and if so what's it achieve?

You're replacing "12D111D0 02621942" with "09000900 0B000900". It's to remove the BIOS protection from the game. It will not boot without this edit.

got it thanks

edit:
for pso v2 i can't find 12D111D0 02621942 or 16515F23 64FF6DE0 the search doesn't find them even though it worked for pso