Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Small problem with internal sd card mod
Автор Сообщение
lolof Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 15.03.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #1
Small problem with internal sd card mod
Hello,

I have done the internal sd mod with access led on my Dreamcast.

By the way, is this normal that the led light up directly during the boot process of the dreamcast (without the dreamshell disc inserted) ????
I mean, if I am playing a disc game for example, the led always light up.

When I use the dreamshell disc and load the dreamshell, all is normal, Led light up when there is access to sd card and doesn't light at all when there is no access.

This is very strange....

I use a resistor 470 ohms just before the LED as described in the tutorial I found on internet.

Does it means that the DC in normal mod constantly send a voltage through the pin 10 of the serial port ???

I would like to solve this small problem.

Thank you for your help
01.04.2011 22:53
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1169 раз(а) в 727 сообщ.
Сообщение: #2
RE: Small problem with internal sd card mod
This is not a problem. Such an effect at everyone DC.

[Изображение: barbers.png]
02.04.2011 12:59
Вебсайт Найти все сообщения Цитировать это сообщение
Dingo Не на форуме
Новичок
*

Сообщений: 11
Зарегистрирован: 27.02.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #3
RE: Small problem with internal sd card mod
(01.04.2011 22:53)lolof писал(а):  Does it means that the DC in normal mod constantly send a voltage through the pin 10 of the serial port

Yup.

The reason it goes off when Dreamshell boots is that dreamshell loads the SD card driver software and sets the serial port to work in that respect.

I suppose what you could do is create a circuit that would only operate the light if a certain voltage threshold is reached. I'm no electrical engineer, but I'm guessing that a transistor and a few resistors could accomplish that somehow.

Of course, you could just increase the value of the resistor you have in there now so that at normal dreamcast operation it won't have enough voltage to light... but you'd also be decreasing the brightness when it's operating by the same factor.
04.04.2011 21:52
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1169 раз(а) в 727 сообщ.
Сообщение: #4
RE: Small problem with internal sd card mod
He is stopping you? Smile
Why complicate the scheme.

[Изображение: barbers.png]
05.04.2011 06:25
Вебсайт Найти все сообщения Цитировать это сообщение
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
  Dreamshell + SD card Serial Adapter state_product 0 1188 01.09.2023 19:30
Посл. сообщение: state_product
  Problem with LazyBoot making Data/Data CDI hsb083 0 933 07.08.2023 12:22
Посл. сообщение: hsb083
  128GB SD Card Dreamshell aldair 0 2562 22.08.2022 02:41
Посл. сообщение: aldair
  Card not recognized news8019 7 6927 21.03.2022 20:57
Посл. сообщение: news8019
  help plz / PC-DC Dreampi (Problem) EduardoKmus 2 4821 11.07.2021 04:02
Посл. сообщение: EduardoKmus
  Problem with multi disc game(First Kiss Story2) chth96 0 3408 18.06.2021 15:15
Посл. сообщение: chth96
  Snk presents Garou (aes4all) on the sd card Dreamshell Dreamcast. aldair 0 3428 15.03.2021 08:08
Посл. сообщение: aldair
Лампочка Fix Problem Sata/Ssd dragoncity 38 67055 03.11.2020 00:17
Посл. сообщение: Anderson
  How to create 4 partitions on the sd card to work in Dreamshell? aldair 0 3437 11.09.2020 16:29
Посл. сообщение: aldair
  Yet another problem with an IDE to SATA fedeuy 3 7107 09.09.2020 18:54
Посл. сообщение: ArturRGT

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)