ISO Loader 0.7.x Beta

[MilkeyWilkey]

My TV accepts PAL50 and PAL60 RGB or composite signal. It cannot accept VGA nor NTSC since it uses different method of color encoding (it shows as grayscale). The R422 jumper does not regulates if console outputs 50 or 60HZ image, it regulates what color encoding is used (PAL or NTSC). To change between 50 and 60hz signal you have to unlock write operation to MBM29LV002 by soldering 12V wire to it and than change region via region changer. there is no easy way to just switch between 50/60hz by just soldering a switch.