Problem trying to convert with raw2adpcm

[aldair]

(12.01.2026 22:21)RetromanX писал(а):  Hello, sorry for the poor English, I'm not a native speaker, so I used a translator.

I've been trying to play games with CDDA and the sound is choppy.

I'm using one card to adapt the Dreamcast's disc drive port to a SATA HDD and one 1TB SATA SSD.

I read that the best thing to do would be to convert the audio from RAW to WAV using raw2adpcm.bat, and I read about the isomake tool.

I downloaded version 2.4 of isomake, but it doesn't work for me; nothing works except optimize_gdi.bat.

I downloaded version 2.3 today, and I managed to convert it using raw2adpcm.bat, but it generated .raw.wav files, like this:

Sega Rally 2 v1.003 (1999)(Sega)(US)[!].gdi
track01.bin
track02.raw.wav
track03.bin
track04.raw.wav
track05.raw.wav , etc...

I tried running it like this and there was no sound, no music. So I edited the .gdi file to match the tracks, changing everything from .raw to .raw.wav, but still no music in the game.

Then I tried removing the .raw from the track names and leaving only .wav, ran it and nothing. After that, I put all the track names back in .raw and changed the files to .raw as well, still no music during the game.

I repeated these processes by running the gdi optimizer before and after, I don't know what else to do, can anyone help me? Thank you.

adpcm is for the SD serial port.