G1-ATA Devices

[SWAT]

(01.04.2014 23:58)OzOnE писал(а):  The G1 adapter design is probably not too bad as it is, but I need to make the board smaller so it will fit into the DC case properly.
Does anyone have any suggestions for the PCB layout on the new batch of boards? (I know that only SWAT, cybdyn, and a few other people have the adapters though).

Make separate jumpers instead of three together. Or micro switches instead of jumpers

(01.04.2014 23:58)OzOnE писал(а):  I'm a teensy bit wary of some of those SD-to-CF adapters, but they should in theory work fine if they follow the ATA command standard.
Some of those converters may only work in CF "memory mode", so standard ATA commands might not work.

Description says:

Цитата:Supports MicroSD/TransFlash all capacities
SD 3.0 ready/accept exFAT file system on Windows
High-Speed CF interface with extreme performance
Supports CF true IDE mode/memory mode/IO mode