No GD-ROM, Can't read MBR from IDE by LBA

Рейтинг темы:

Голосов: 0 - Средняя оценка: 0
1
2
3
4
5

Каскадный режим \| Линейный режим No GD-ROM, Can't read MBR from IDE by LBA
Автор	Сообщение

polyfusion Не на форуме

Новичок

Сообщений: 6
Зарегистрирован: 21.07.2014
Рейтинг: 0

Сказал спасибо: 1
Поблагодарили 1 раз(а) в 1 сообщ.

Сообщение: #2

RE: No GD-ROM, Can't read MBR from IDE by LBA

I got it working, I was looking at some photos of HDD's people were using in their DCs, and could just about make out that they were jumpered. So I put a jumper on the two pins that looked like it needed it, and it works great now.

Also, I see 3 solder points which look like they are in the right location for the DCs lid switch. Had anyone installed a switch, and advantage/disadvantage to doing so?

Many thanks to everyone who made this happen.

30.04.2016 15:42

« Предыдущая | Следующая »

Сообщения в этой теме

No GD-ROM, Can't read MBR from IDE by LBA - polyfusion - 30.04.2016, 12:18

RE: No GD-ROM, Can't read MBR from IDE by LBA - polyfusion - 30.04.2016 15:42

RE: No GD-ROM, Can't read MBR from IDE by LBA - megavolt85 - 30.04.2016, 15:46

RE: No GD-ROM, Can't read MBR from IDE by LBA - jacobsson - 08.05.2017, 12:58

Похожие темы
Тема:		Автор	Ответов:	Просмотров:	Посл. сообщение
	Sturmwind Fix Read Error	dragoncity	23	33696	31.01.2022 14:53 Посл. сообщение: fafadou

Переход:

Пользователи просматривают эту тему: 1 Гость(ей)