Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Flashing
Автор Сообщение
vincent Не на форуме
Пользователь
**

Сообщений: 25
Зарегистрирован: 09.12.2014
Рейтинг: 0
Сказал спасибо: 2
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #1
Flashing
Hi

I´m trying to flash a MX29L3211 with to bios via Dreamshell.
Pin 1 is connected to pin 9 of IC509 and pin 44 is connected with ground or to 3.3V via 10k resistor.
When trying to flash MX29L3211 with Dreamshell I get the following message : Error Writing Fail. Status Code 4.
Dreamshell detects MX29L3211 and I can read from it, but not flash it?

Any idea?
29.03.2019 22:46
Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #2
RE: Flashing
VA1 mainboard? Last dreamshell from github?
when you look "Error Writing Fail. Status Code 4.", press start, press A, create screenshot from console

need buy MX29L3211 and create dual bios Wink

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
(Последний раз сообщение было отредактировано 30.03.2019 в 01:02, отредактировал пользователь megavolt85.)
30.03.2019 00:35
Найти все сообщения Цитировать это сообщение
Tomi132 Не на форуме
Новичок
*

Сообщений: 8
Зарегистрирован: 21.08.2017
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #3
RE: Flashing
(30.03.2019 00:35)megavolt85 писал(а):  VA1 mainboard? Last dreamshell from github?
when you look "Error Writing Fail. Status Code 4.", press start, press A, create screenshot from console

need buy MX29L3211 and create dual bios Wink

VA1 board and latest Dreamshell from Github.
I have already replaced the bios chip with MX29LV160 and flashed it with the Dreamshell bootloader. The Dreamshell folder is on a CF card.

Connected a MX29L3211 with the corresponding legs of MX29LV160.
Pin12 of MX29L3211 and MX29LV160 is connected with 3.3V via 10k resistor and you can switch between the two chips by connecting pin12 with diode D501.
Pin1 of MX29LV160 is connected with 3.3V
Pin44 of MX29LV160 is connected with Pin9 of IC502.
Pin1 of MX29L3211 is connected with Pin9 of IC502.
Pin44 of MX29L3211 is connected with 3.3V via 10k resistor respectivley ground : depends on which half of the chip you want to flash.


.jpg  IMG_0617.JPG (Размер: 129.45 Кб / Загрузок: 15)
05.04.2019 22:03
Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #4
RE: Flashing
update bflash module and check again


Прикрепления
.7z  bflash.klf.7z (Размер: 7.65 Кб / Загрузок: 8)

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
06.04.2019 02:25
Найти все сообщения Цитировать это сообщение
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
  Problem with bios flashing va0 using mx29f1610mc-10 cryptblood1986 22 28986 18.09.2019 23:07
Посл. сообщение: megavolt85
  Flashing VA0 bios only works for the second time MastaG 1 7225 27.03.2018 13:00
Посл. сообщение: SWAT
  Faulty video-output: white flashing picture jacobsson 16 34618 18.05.2017 20:29
Посл. сообщение: aykiri1
  I need help plz with bios flashing error status somacast 26 79774 16.12.2016 23:44
Посл. сообщение: somacast
  Flashing VA0 bios chip to load dreamshell from SD card. leetuser 14 44014 23.06.2015 02:38
Посл. сообщение: leetuser
  Bios Flashing on the Sega Dreamcast aldair 1 13460 29.02.2012 07:54
Посл. сообщение: SWAT

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)