Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Modem using post to an API!
Автор Сообщение
NeoSnk Не на форуме
Новичок
*

Сообщений: 8
Зарегистрирован: 29.06.2016
Рейтинг: 0
Сказал спасибо: 7
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #1
Modem using post to an API!
Hello guys, I want to do a test with the Dreamcast Modem. I learned about the BlueCrab ppp.h in KallistiOS, and I'm able to make the Modem Dial and also ping an IP. I'd like to know if it is possible to ping a PHP URL using the post method where I'm going to send some parameters, example:

http://www.mytext.com?name=dreamcast&age=21

I'm using this code:

#include <stdio.h>
#include <kos/dbglog.h>

#include <arch/arch.h>

#include <ppp/ppp.h>
#include <kos/net.h>

KOS_INIT_FLAGS(INIT_DEFAULT | INIT_NET);

int main(int argc, char *argv[]) {
int i;

ppp_init();

i = ppp_modem_init("12", 1, NULL);
if(i < 0)
return 0;

ppp_set_login("dream", "cast");
i = ppp_connect();

if(i == -1) {
printf("Link establishment failed!\n");
return 0;
}

printf("Pinging the other side of the link (%d.%d.%d.%d)\n",
net_default_dev->gateway[0], net_default_dev->gateway[1],
net_default_dev->gateway[2], net_default_dev->gateway[3]);

for(i = 0; i < 10; ++i) {
net_icmp_send_echo(net_default_dev, net_default_dev->gateway, 1234, i,
NULL, 0);
thd_sleep(500);
}

printf("Pinging sylverant.net (67.222.144.120)\n");
for(i = 0; i < 10; ++i) {
uint8 addr[4] = { 67, 222, 144, 120 };
net_icmp_send_echo(net_default_dev, addr, 1234, i, NULL, 0);
thd_sleep(500);
}

ppp_shutdown();
return 0;
}

I tried to created a method: https://stackoverflow.com/questions/2207...e-response

But I didn't get it working. Any input or directions would be welcome, thanks a lot.
(Последний раз сообщение было отредактировано 02.03.2021 в 23:03, отредактировал пользователь NeoSnk.)
02.03.2021 23:02
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7124
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #2
RE: Modem using post to an API!
Show execution log plz.

[Изображение: barbers.png]
03.03.2021 07:43
Вебсайт Найти все сообщения Цитировать это сообщение
 Сказали спасибо: NeoSnk
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3064
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1509 раз(а) в 892 сообщ.
Сообщение: #3
RE: Modem using post to an API!
Код:
#include <stdio.h>
#include <kos/dbglog.h>

#include <arch/arch.h>

#include <ppp/ppp.h>
#include <kos/net.h>

KOS_INIT_FLAGS(INIT_DEFAULT | INIT_NET);

int main(int argc, char *argv[])
{
    int i,conn_rate = 0;
    
    ppp_init();
    
    i = ppp_modem_init("11111", 0, &conn_rate);
    
    if(i < 0)
        return 0;
    
    ppp_set_login("dream", "dreamcast");
    i = ppp_connect();
    
    if(i < 0)
    {
        printf("Link establishment failed!\n");
        return 0;
    }
    
    printf("Link established, rate is %d bps\n", conn_rate);
    
    printf("Pinging the other side of the link (%d.%d.%d.%d)\n",
    net_default_dev->gateway[0], net_default_dev->gateway[1],
    net_default_dev->gateway[2], net_default_dev->gateway[3]);

    for(i = 0; i < 10; ++i)
    {
        net_icmp_send_echo(net_default_dev, net_default_dev->gateway, 1234, i, NULL, 0);
        thd_sleep(500);
    }

    printf("Pinging sylverant.net (138.197.20.130)\n");
    
    for(i = 0; i < 10; ++i)
    {
        uint8 addr[4] = { 138, 197, 20, 130 };
        net_icmp_send_echo(net_default_dev, addr, 1234, i, NULL, 0);
        thd_sleep(500);
    }

    ppp_shutdown();
    
    return 0;
}

Код:
--
KallistiOS ##version##:
  Пн дек 14 04:23:24 MSK 2020
  megavolt@megavolt85:/home/megavolt/dreamcast/kos
maple: active drivers:
    Dreameye (Camera): Camera
    Sound Input Peripheral: Microphone
    PuruPuru (Vibration) Pack: JumpPack
    VMU Driver: Clock, LCD, MemoryCard
    Mouse Driver: Mouse
    Keyboard Driver: Keyboard
    Controller Driver: Controller
    Lightgun: LightGun
  DMA Buffer at ac0ad800
vid_set_mode: 640x480 VGA
dc-load console support enabled
maple: attached devices:
  A0: Dreamcast Controller          (01000000: Controller)
  A1: Visual Memory                 (0e000000: Clock, LCD, MemoryCard)
lan_adapter: no device detected (wrong type = 0)
net_dev_init: detected 0 usable network device(s)
ppp_modem: connected at 33600 bps
ppp: entering phase Establish
lcp: Peer configure request received with opts:
    peer accm: 00000000
    peer magic: 6126407b
    protocol compression on
    addr/ctrl compression on
lcp: received configure ack
ppp: entering phase Network
ipcp: Peer configure request received with opts:
    unknown option: 2 (len 6)
    peer IP: 192.168.1.99
ipcp: peer sent configure nak with opts:
    our IP: 192.168.1.98
    DNS 1: 192.168.1.99
ipcp: Peer configure request received with opts:
    peer IP: 192.168.1.99
ppp: dropping packet with bad final fcs, got: 9b0b
ppp: was for proto 8021
ppp: was 20 bytes long
ipcp: Peer configure request received with opts:
    unknown option: 2 (len 6)
    peer IP: 192.168.1.99
ipcp: received configure ack
ipcp: Peer configure request received with opts:
    peer IP: 192.168.1.99
ppp: entering phase Network
Link established, rate is 33600 bps
Pinging the other side of the link (192.168.1.99)
16 bytes from 192.168.1.99: icmp_seq=0 ttl=64 time=88.415 ms
16 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=87.220 ms
16 bytes from 192.168.1.99: icmp_seq=2 ttl=64 time=89.613 ms
16 bytes from 192.168.1.99: icmp_seq=3 ttl=64 time=89.520 ms
16 bytes from 192.168.1.99: icmp_seq=4 ttl=64 time=88.099 ms
16 bytes from 192.168.1.99: icmp_seq=5 ttl=64 time=87.663 ms
16 bytes from 192.168.1.99: icmp_seq=6 ttl=64 time=86.339 ms
16 bytes from 192.168.1.99: icmp_seq=7 ttl=64 time=89.626 ms
16 bytes from 192.168.1.99: icmp_seq=8 ttl=64 time=88.878 ms
16 bytes from 192.168.1.99: icmp_seq=9 ttl=64 time=87.884 ms
Pinging sylverant.net (138.197.20.130)
16 bytes from 138.197.20.130: icmp_seq=0 ttl=52 time=230.623 ms
16 bytes from 138.197.20.130: icmp_seq=1 ttl=52 time=224.942 ms
16 bytes from 138.197.20.130: icmp_seq=2 ttl=52 time=222.708 ms
16 bytes from 138.197.20.130: icmp_seq=3 ttl=52 time=228.495 ms
16 bytes from 138.197.20.130: icmp_seq=4 ttl=52 time=224.635 ms
16 bytes from 138.197.20.130: icmp_seq=5 ttl=52 time=230.281 ms
16 bytes from 138.197.20.130: icmp_seq=6 ttl=52 time=240.357 ms
16 bytes from 138.197.20.130: icmp_seq=7 ttl=52 time=226.467 ms
16 bytes from 138.197.20.130: icmp_seq=8 ttl=52 time=219.864 ms
16 bytes from 138.197.20.130: icmp_seq=9 ttl=52 time=226.144 ms
arch: shutting down kernel
net_unreg_device: 'bba' isn't registered
maple: final stats -- device count = 2, vbl_cntr = 3208, dma_cntr = 3191
vid_set_mode: 640x480 VGA

use DNS for ping

Код:
#include <stdio.h>
#include <string.h>

#include <netdb.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <netinet/in.h>

#include <kos/net.h>
#include <kos/dbgio.h>
#include <arch/arch.h>
#include <ppp/ppp.h>

KOS_INIT_FLAGS(INIT_DEFAULT | INIT_NET);

int main(int argc, char *argv[])
{
    int i,conn_rate = 0;
    struct addrinfo *ai;
    struct addrinfo hints;
    int err;
    
    
    ppp_init();
    
    i = ppp_modem_init("11111", 0, &conn_rate);
    
    if(i < 0)
        return 0;
    
    ppp_set_login("dream", "dreamcast");
    i = ppp_connect();
    
    if(i < 0)
    {
        printf("Link establishment failed!\n");
        return 0;
    }
    
    printf("Link established, rate is %d bps\n", conn_rate);
    
    printf("Looking up IPv4 address of sylverant.net\n");
    memset(&hints, 0, sizeof(hints));
    hints.ai_family = AF_INET;

    if((err = getaddrinfo("sylverant.net", NULL, &hints, &ai))) {
        printf("Error looking up IPv4 address information: %d\n", err);
        ppp_shutdown();
    
        return 0;
    }
    
    printf("Ping sylverant.net\n");
    
    uint8_t addr[4];
    
    for (i = 0; i < 4; i++)
    {
        addr[i] = ((struct sockaddr_in *)ai->ai_addr)->sin_addr.s_addr >> (i*8);
    }
    
    for(i = 0; i < 10; ++i)
    {
        net_icmp_send_echo(net_default_dev, addr, 1234, i, NULL, 0);
        thd_sleep(500);
    }
    
    freeaddrinfo(ai);
    ppp_shutdown();
    
    return 0;
}

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
(Последний раз сообщение было отредактировано 03.03.2021 в 15:59, отредактировал пользователь megavolt85.)
03.03.2021 14:58
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: NeoSnk
NeoSnk Не на форуме
Новичок
*

Сообщений: 8
Зарегистрирован: 29.06.2016
Рейтинг: 0
Сказал спасибо: 7
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #4
RE: Modem using post to an API!
(03.03.2021 14:58)megavolt85 писал(а):  
Код:
#include <stdio.h>
#include <kos/dbglog.h>

#include <arch/arch.h>

#include <ppp/ppp.h>
#include <kos/net.h>

KOS_INIT_FLAGS(INIT_DEFAULT | INIT_NET);

int main(int argc, char *argv[])
{
    int i,conn_rate = 0;
    
    ppp_init();
    
    i = ppp_modem_init("11111", 0, &conn_rate);
    
    if(i < 0)
        return 0;
    
    ppp_set_login("dream", "dreamcast");
    i = ppp_connect();
    
    if(i < 0)
    {
        printf("Link establishment failed!\n");
        return 0;
    }
    
    printf("Link established, rate is %d bps\n", conn_rate);
    
    printf("Pinging the other side of the link (%d.%d.%d.%d)\n",
    net_default_dev->gateway[0], net_default_dev->gateway[1],
    net_default_dev->gateway[2], net_default_dev->gateway[3]);

    for(i = 0; i < 10; ++i)
    {
        net_icmp_send_echo(net_default_dev, net_default_dev->gateway, 1234, i, NULL, 0);
        thd_sleep(500);
    }

    printf("Pinging sylverant.net (138.197.20.130)\n");
    
    for(i = 0; i < 10; ++i)
    {
        uint8 addr[4] = { 138, 197, 20, 130 };
        net_icmp_send_echo(net_default_dev, addr, 1234, i, NULL, 0);
        thd_sleep(500);
    }

    ppp_shutdown();
    
    return 0;
}

Код:
--
KallistiOS ##version##:
  Пн дек 14 04:23:24 MSK 2020
  megavolt@megavolt85:/home/megavolt/dreamcast/kos
maple: active drivers:
    Dreameye (Camera): Camera
    Sound Input Peripheral: Microphone
    PuruPuru (Vibration) Pack: JumpPack
    VMU Driver: Clock, LCD, MemoryCard
    Mouse Driver: Mouse
    Keyboard Driver: Keyboard
    Controller Driver: Controller
    Lightgun: LightGun
  DMA Buffer at ac0ad800
vid_set_mode: 640x480 VGA
dc-load console support enabled
maple: attached devices:
  A0: Dreamcast Controller          (01000000: Controller)
  A1: Visual Memory                 (0e000000: Clock, LCD, MemoryCard)
lan_adapter: no device detected (wrong type = 0)
net_dev_init: detected 0 usable network device(s)
ppp_modem: connected at 33600 bps
ppp: entering phase Establish
lcp: Peer configure request received with opts:
    peer accm: 00000000
    peer magic: 6126407b
    protocol compression on
    addr/ctrl compression on
lcp: received configure ack
ppp: entering phase Network
ipcp: Peer configure request received with opts:
    unknown option: 2 (len 6)
    peer IP: 192.168.1.99
ipcp: peer sent configure nak with opts:
    our IP: 192.168.1.98
    DNS 1: 192.168.1.99
ipcp: Peer configure request received with opts:
    peer IP: 192.168.1.99
ppp: dropping packet with bad final fcs, got: 9b0b
ppp: was for proto 8021
ppp: was 20 bytes long
ipcp: Peer configure request received with opts:
    unknown option: 2 (len 6)
    peer IP: 192.168.1.99
ipcp: received configure ack
ipcp: Peer configure request received with opts:
    peer IP: 192.168.1.99
ppp: entering phase Network
Link established, rate is 33600 bps
Pinging the other side of the link (192.168.1.99)
16 bytes from 192.168.1.99: icmp_seq=0 ttl=64 time=88.415 ms
16 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=87.220 ms
16 bytes from 192.168.1.99: icmp_seq=2 ttl=64 time=89.613 ms
16 bytes from 192.168.1.99: icmp_seq=3 ttl=64 time=89.520 ms
16 bytes from 192.168.1.99: icmp_seq=4 ttl=64 time=88.099 ms
16 bytes from 192.168.1.99: icmp_seq=5 ttl=64 time=87.663 ms
16 bytes from 192.168.1.99: icmp_seq=6 ttl=64 time=86.339 ms
16 bytes from 192.168.1.99: icmp_seq=7 ttl=64 time=89.626 ms
16 bytes from 192.168.1.99: icmp_seq=8 ttl=64 time=88.878 ms
16 bytes from 192.168.1.99: icmp_seq=9 ttl=64 time=87.884 ms
Pinging sylverant.net (138.197.20.130)
16 bytes from 138.197.20.130: icmp_seq=0 ttl=52 time=230.623 ms
16 bytes from 138.197.20.130: icmp_seq=1 ttl=52 time=224.942 ms
16 bytes from 138.197.20.130: icmp_seq=2 ttl=52 time=222.708 ms
16 bytes from 138.197.20.130: icmp_seq=3 ttl=52 time=228.495 ms
16 bytes from 138.197.20.130: icmp_seq=4 ttl=52 time=224.635 ms
16 bytes from 138.197.20.130: icmp_seq=5 ttl=52 time=230.281 ms
16 bytes from 138.197.20.130: icmp_seq=6 ttl=52 time=240.357 ms
16 bytes from 138.197.20.130: icmp_seq=7 ttl=52 time=226.467 ms
16 bytes from 138.197.20.130: icmp_seq=8 ttl=52 time=219.864 ms
16 bytes from 138.197.20.130: icmp_seq=9 ttl=52 time=226.144 ms
arch: shutting down kernel
net_unreg_device: 'bba' isn't registered
maple: final stats -- device count = 2, vbl_cntr = 3208, dma_cntr = 3191
vid_set_mode: 640x480 VGA

use DNS for ping

Код:
#include <stdio.h>
#include <string.h>

#include <netdb.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <netinet/in.h>

#include <kos/net.h>
#include <kos/dbgio.h>
#include <arch/arch.h>
#include <ppp/ppp.h>

KOS_INIT_FLAGS(INIT_DEFAULT | INIT_NET);

int main(int argc, char *argv[])
{
    int i,conn_rate = 0;
    struct addrinfo *ai;
    struct addrinfo hints;
    int err;
    
    
    ppp_init();
    
    i = ppp_modem_init("11111", 0, &conn_rate);
    
    if(i < 0)
        return 0;
    
    ppp_set_login("dream", "dreamcast");
    i = ppp_connect();
    
    if(i < 0)
    {
        printf("Link establishment failed!\n");
        return 0;
    }
    
    printf("Link established, rate is %d bps\n", conn_rate);
    
    printf("Looking up IPv4 address of sylverant.net\n");
    memset(&hints, 0, sizeof(hints));
    hints.ai_family = AF_INET;

    if((err = getaddrinfo("sylverant.net", NULL, &hints, &ai))) {
        printf("Error looking up IPv4 address information: %d\n", err);
        ppp_shutdown();
    
        return 0;
    }
    
    printf("Ping sylverant.net\n");
    
    uint8_t addr[4];
    
    for (i = 0; i < 4; i++)
    {
        addr[i] = ((struct sockaddr_in *)ai->ai_addr)->sin_addr.s_addr >> (i*8);
    }
    
    for(i = 0; i < 10; ++i)
    {
        net_icmp_send_echo(net_default_dev, addr, 1234, i, NULL, 0);
        thd_sleep(500);
    }
    
    freeaddrinfo(ai);
    ppp_shutdown();
    
    return 0;
}

Thanks a lot Megavolt85, is it possible to ping a URL and send some parameters to a post method?

I want to make a online ranking, so the URL would receive something like:

http://www.mygame.com?name="dreamcast"&score="1000"

I'm going to try to do a post using pure C++ anyway.

(02.03.2021 23:02)NeoSnk писал(а):  Hello guys, I want to do a test with the Dreamcast Modem. I learned about the BlueCrab ppp.h in KallistiOS, and I'm able to make the Modem Dial and also ping an IP. I'd like to know if it is possible to ping a PHP URL using the post method where I'm going to send some parameters, example:

http://www.mytext.com?name=dreamcast&age=21

I'm using this code:

#include <stdio.h>
#include <kos/dbglog.h>

#include <arch/arch.h>

#include <ppp/ppp.h>
#include <kos/net.h>

KOS_INIT_FLAGS(INIT_DEFAULT | INIT_NET);

int main(int argc, char *argv[]) {
int i;

ppp_init();

i = ppp_modem_init("12", 1, NULL);
if(i < 0)
return 0;

ppp_set_login("dream", "cast");
i = ppp_connect();

if(i == -1) {
printf("Link establishment failed!\n");
return 0;
}

printf("Pinging the other side of the link (%d.%d.%d.%d)\n",
net_default_dev->gateway[0], net_default_dev->gateway[1],
net_default_dev->gateway[2], net_default_dev->gateway[3]);

for(i = 0; i < 10; ++i) {
net_icmp_send_echo(net_default_dev, net_default_dev->gateway, 1234, i,
NULL, 0);
thd_sleep(500);
}

printf("Pinging sylverant.net (67.222.144.120)\n");
for(i = 0; i < 10; ++i) {
uint8 addr[4] = { 67, 222, 144, 120 };
net_icmp_send_echo(net_default_dev, addr, 1234, i, NULL, 0);
thd_sleep(500);
}

ppp_shutdown();
return 0;
}

I tried to created a method: https://stackoverflow.com/questions/2207...e-response

But I didn't get it working. Any input or directions would be welcome, thanks a lot.

I'm going to try with the MegaVolt Code and I'll get a log. thanks.
(Последний раз сообщение было отредактировано 03.03.2021 в 16:19, отредактировал пользователь NeoSnk.)
03.03.2021 16:18
Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3064
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1509 раз(а) в 892 сообщ.
Сообщение: #5
RE: Modem using post to an API!
(03.03.2021 16:18)NeoSnk писал(а):  I want to make a online ranking, so the URL would receive something like:

you have webserver for test connection and look result?

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
03.03.2021 16:47
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: NeoSnk
NeoSnk Не на форуме
Новичок
*

Сообщений: 8
Зарегистрирован: 29.06.2016
Рейтинг: 0
Сказал спасибо: 7
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #6
RE: Modem using post to an API!
(03.03.2021 16:47)megavolt85 писал(а):  
(03.03.2021 16:18)NeoSnk писал(а):  I want to make a online ranking, so the URL would receive something like:

you have webserver for test connection and look result?

Yes I did this one for testing:

https://mcdctest.000webhostapp.com/

If you ping it with some parameters, it will show the new data.

Example:

https://mcdctest.000webhostapp.com?name="Megavolt85"&score="400"
(Последний раз сообщение было отредактировано 03.03.2021 в 17:23, отредактировал пользователь NeoSnk.)
03.03.2021 17:22
Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3064
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1509 раз(а) в 892 сообщ.
Сообщение: #7
RE: Modem using post to an API!
https is not a good choice for dreamcast, use only http

EDIT, oh i'm check, http supported

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
(Последний раз сообщение было отредактировано 03.03.2021 в 17:28, отредактировал пользователь megavolt85.)
03.03.2021 17:27
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: NeoSnk
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3064
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1509 раз(а) в 892 сообщ.
Сообщение: #8
RE: Modem using post to an API!
I'm sorry, but the network functions via a modem in KOS do not work
work only ping

you can compile example httpd, it's don't work via modem

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
(Последний раз сообщение было отредактировано 04.03.2021 в 02:38, отредактировал пользователь megavolt85.)
04.03.2021 02:20
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: NeoSnk
NeoSnk Не на форуме
Новичок
*

Сообщений: 8
Зарегистрирован: 29.06.2016
Рейтинг: 0
Сказал спасибо: 7
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #9
RE: Modem using post to an API!
(04.03.2021 02:20)megavolt85 писал(а):  I'm sorry, but the network functions via a modem in KOS do not work
work only ping

you can compile example httpd, it's don't work via modem

It's okay, thanks a lot for trying to help me! Do you think I can get it working with the BBA?
04.03.2021 03:34
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7124
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #10
RE: Modem using post to an API!
(04.03.2021 03:34)NeoSnk писал(а):  
(04.03.2021 02:20)megavolt85 писал(а):  I'm sorry, but the network functions via a modem in KOS do not work
work only ping

you can compile example httpd, it's don't work via modem

It's okay, thanks a lot for trying to help me! Do you think I can get it working with the BBA?

Network in KOS doesn't work on BBA too Smile)) At least on my adapter.
Moreover, it never worked and the author of this code ignores this fact.

[Изображение: barbers.png]
04.03.2021 08:37
Вебсайт Найти все сообщения Цитировать это сообщение
 Сказали спасибо: NeoSnk
NeoSnk Не на форуме
Новичок
*

Сообщений: 8
Зарегистрирован: 29.06.2016
Рейтинг: 0
Сказал спасибо: 7
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #11
RE: Modem using post to an API!
I understand!!! That is sad =/ Well, thanks a lot you two Smile
04.03.2021 16:08
Найти все сообщения Цитировать это сообщение
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
  USB Modem Voltage Inducer for Dreamcast aldair 0 5381 08.01.2020 19:12
Посл. сообщение: aldair
  My very first post. Turbokat 2 9832 29.04.2017 14:09
Посл. сообщение: Turbokat
  My first forum post tossEAC 4 16781 03.04.2017 00:33
Посл. сообщение: tossEAC
  Dreamcast DC-PC (FAX MODEM USB): 4X4 Evolution online 100% aldair 0 7169 27.08.2015 20:04
Посл. сообщение: aldair
  Moband Adapter ( Dreamcast modem broadband replacement band ) aldair 1 13691 24.05.2014 21:21
Посл. сообщение: cybdyn
  Connecting to the Internet via USB Modem Dreamcast in emulating win98 win7 aldair 0 6883 16.10.2013 16:55
Посл. сообщение: aldair

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)