Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
gdrom board out of order :(
Автор Сообщение
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #1
Шокирован gdrom board out of order :(
hello,

during my early attempts to do the mod I had sone wiring errors so I had to solder & desolder maaaaaany times, so I ended up with a gdrom not working when i fix it, i tried cleaning etc didnt help, it behaves as if no gdrom is attached (black screen then still dreamcast logo).

story goes on, as i by mistake removed (R233), i just tried to fix it without magnifier lens so i fixed it wrong in short circuit, so when i tried the board smoke smell came quickly and i did not try it again, Sad Sad

is this repairable? i dont have the R233 it was broken,, so where to start, because like this my stock dreamcast is not working



photo is here. https://www.dropbox.com/s/wvwpj29chna6am...6.jpg?dl=0
16.12.2016 21:49
Найти все сообщения Цитировать это сообщение
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #2
RE: gdrom board out of order :(
any clue hint would be really helpful , thnx n advance
17.12.2016 00:11
Найти все сообщения Цитировать это сообщение
aykiri1 Не на форуме
Пользователь
**

Сообщений: 50
Зарегистрирован: 15.11.2016
Рейтинг: 1
Сказал спасибо: 6
Поблагодарили 29 раз(а) в 16 сообщ.
Сообщение: #3
RE: gdrom board out of order :(
(16.12.2016 21:49)somacast писал(а):  hello,

during my early attempts to do the mod I had sone wiring errors so I had to solder & desolder maaaaaany times, so I ended up with a gdrom not working when i fix it, i tried cleaning etc didnt help, it behaves as if no gdrom is attached (black screen then still dreamcast logo).

story goes on, as i by mistake removed (R233), i just tried to fix it without magnifier lens so i fixed it wrong in short circuit, so when i tried the board smoke smell came quickly and i did not try it again, Sad Sad

is this repairable? i dont have the R233 it was broken,, so where to start, because like this my stock dreamcast is not working



photo is here. https://www.dropbox.com/s/wvwpj29chna6am...6.jpg?dl=0

100Kohm resistor. you can use smd or non smd too
17.12.2016 00:14
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: somacast
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #4
RE: gdrom board out of order :(
thnx a lot , next what to do after restoring the Resistor??
17.12.2016 01:09
Найти все сообщения Цитировать это сообщение
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #5
RE: gdrom board out of order :(
update : soldered a non smd 100 kohms to the board, dreamcast behaves as if no gdrom installed, when i depress the cover button laser unit does not respond, motor not moving and no laser... what to check plz?
17.12.2016 01:51
Найти все сообщения Цитировать это сообщение
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #6
RE: gdrom board out of order :(
I searched for fuse components but could not find, could it be a cap is gone ??
17.12.2016 21:18
Найти все сообщения Цитировать это сообщение
aykiri1 Не на форуме
Пользователь
**

Сообщений: 50
Зарегистрирован: 15.11.2016
Рейтинг: 1
Сказал спасибо: 6
Поблагодарили 29 раз(а) в 16 сообщ.
Сообщение: #7
RE: gdrom board out of order :(
(17.12.2016 21:18)somacast писал(а):  I searched for fuse components but could not find, could it be a cap is gone ??

usually caps gone by long time working,hot,short-circuit and i think your caps are alive
18.12.2016 18:08
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: somacast
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #8
RE: gdrom board out of order :(
(18.12.2016 18:08)aykiri1 писал(а):  
(17.12.2016 21:18)somacast писал(а):  I searched for fuse components but could not find, could it be a cap is gone ??

usually caps gone by long time working,hot,short-circuit and i think your caps are alive

thnx again , but as I said there was a smoke smell when I restored the shorted resistor ... so could it be one of the caps gone like that ? visually I don't see anything unsuall but it still not working..
19.12.2016 21:32
Найти все сообщения Цитировать это сообщение
aykiri1 Не на форуме
Пользователь
**

Сообщений: 50
Зарегистрирован: 15.11.2016
Рейтинг: 1
Сказал спасибо: 6
Поблагодарили 29 раз(а) в 16 сообщ.
Сообщение: #9
RE: gdrom board out of order :(
(19.12.2016 21:32)somacast писал(а):  
(18.12.2016 18:08)aykiri1 писал(а):  
(17.12.2016 21:18)somacast писал(а):  I searched for fuse components but could not find, could it be a cap is gone ??

usually caps gone by long time working,hot,short-circuit and i think your caps are alive

thnx again , but as I said there was a smoke smell when I restored the shorted resistor ... so could it be one of the caps gone like that ? visually I don't see anything unsuall but it still not working..

can you take a hi-res photo ?
21.12.2016 01:09
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: somacast
Gillbert Не на форуме
Продвинутый
***

Сообщений: 127
Зарегистрирован: 10.08.2014
Рейтинг: 4
Сказал спасибо: 30
Поблагодарили 54 раз(а) в 34 сообщ.
Сообщение: #10
RE: gdrom board out of order :(
(19.12.2016 21:32)somacast писал(а):  [quote='aykiri1' pid='33519' dateline='1482070086']
[quote='somacast' pid='33508' dateline='1481995091']
I searched for fuse components but could not find, could it be a cap is gone ??


there was a smoke smell when I restored the shorted resistor ... so could it be one of the caps gone like that ? visually I don't see anything unsuall but it still not working..

It's hard to tell something about it, can be a lot of things. But from your description it seems that you shorted the +3volts line with another one. R233 is responsible for RESET line.
Was the GD-ROM board damaged only? Is the mainboard still working?
In such situations, it's pretty rare a capacitor failure, it's most like a fuse, resistor or a semiconductor (transistor, IC). Yes, some hi-res pics from both sides of GD-ROM PCB should be welcome.
21.12.2016 07:58
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: somacast
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #11
RE: gdrom board out of order :(
really big thnx for replying.

Yes the main board is still working, I even moved the mod to it after I lost the GD-ROM board.

https://www.dropbox.com/sh/dsy5e9ctsvca1...a6eca?dl=0

the photos as requested,
21.12.2016 21:59
Найти все сообщения Цитировать это сообщение
Gillbert Не на форуме
Продвинутый
***

Сообщений: 127
Зарегистрирован: 10.08.2014
Рейтинг: 4
Сказал спасибо: 30
Поблагодарили 54 раз(а) в 34 сообщ.
Сообщение: #12
RE: gdrom board out of order :(
(21.12.2016 21:59)somacast писал(а):  https://www.dropbox.com/sh/dsy5e9ctsvca1...a6eca?dl=0

the photos as requested,

Please, if you have a magnifier, check IC4 (TC9450) where I marked in red, is it a cracked?


Прикрепления
.jpg  unspecified.jpg (Размер: 401.35 Кб / Загрузок: 10)
22.12.2016 06:56
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: somacast
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #13
RE: gdrom board out of order :(
thnx alot, i will once i get back home.
22.12.2016 08:30
Найти все сообщения Цитировать это сообщение
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #14
RE: gdrom board out of order :(
ok checked it, does not seem like blown or broken seems like just a scratch or so, any other hints plz?
22.12.2016 22:28
Найти все сообщения Цитировать это сообщение
somacast Не на форуме
Пользователь
**

Сообщений: 54
Зарегистрирован: 02.12.2016
Рейтинг: 0
Сказал спасибо: 41
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #15
RE: gdrom board out of order :(
any other useful information? i dont want to replace the entire drive for this


thnx
25.12.2016 01:05
Найти все сообщения Цитировать это сообщение
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
  Is it possible to patch WinCE game in order to force 60hz mode? chth96 0 3177 06.06.2021 08:30
Посл. сообщение: chth96
  Ok to use 3v flash chip on VA0 board? Poknatus 5 15638 21.04.2018 19:15
Посл. сообщение: thameslink
  Does it work? _Dreamcast (no-gdrom.bios) aldair 0 6122 04.10.2017 18:34
Посл. сообщение: aldair
Видео Is there any bios mod tutorial for VA2.1 board? Poknatus 2 9435 29.04.2017 23:05
Посл. сообщение: news8019
  Making Dreamcast GDROM dumps with 3 data tracks and raw audio smaller tossEAC 0 6023 03.04.2017 17:59
Посл. сообщение: tossEAC
  DC with IDE and no GDROM will not boot Some chump 16 44186 01.03.2017 06:20
Посл. сообщение: aldair
  IDE SATA ADAPTER IN GDROM aldair 2 11063 30.07.2016 01:11
Посл. сообщение: aldair
  GDRom drive replacement found! Anthony817 12 39630 25.01.2012 02:00
Посл. сообщение: cybdyn
  Scratched gdrom disc neon 1 9499 24.07.2011 19:15
Посл. сообщение: SWAT

Переход:


Пользователи просматривают эту тему: