Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Freezing after bios installation
Автор Сообщение
olleulv Не на форуме
Новичок
*

Сообщений: 9
Зарегистрирован: 18.04.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #1
Freezing after bios installation
Hi,

I just got a Dreamcast with modded bios, sd-card, vga-mod.
I installed Dreamshell to the bios, tested some applications and decided to go back to "normal".

So.. I uninstalled Dreamshell from bios...

Now the system freezes whn reading any disc... doesn't matter if it's an audio cd or an original DC-game... or homebrew...

Anyone got a clue?
21.04.2011 10:52
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #2
RE: Freezing after bios installation
You must have a switch on the original bios. Switch back to the original bios, load DS, switch back to the modified bios and flashing using a file manager other bios (just click on the file . bios 2 times).

This was due to the fact that with uninstall of DS, flashing the bios from DevBox, without a hack. It does not work on normal DC. This is my error, sorry, I forgot about it Smile
I corrected this in the new version of DS.

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 21.04.2011 в 12:32, отредактировал пользователь SWAT.)
21.04.2011 12:25
Вебсайт Найти все сообщения Цитировать это сообщение
olleulv Не на форуме
Новичок
*

Сообщений: 9
Зарегистрирован: 18.04.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #3
RE: Freezing after bios installation
ok... how do you mean.. switch? physical on motherboardor in the software? I haven't seen any.... I have one physical external switch for VGA/AV....

Sorry if I suck.... Smile
21.04.2011 17:12
Найти все сообщения Цитировать это сообщение
olleulv Не на форуме
Новичок
*

Сообщений: 9
Зарегистрирован: 18.04.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #4
RE: Freezing after bios installation
(21.04.2011 17:12)olleulv писал(а):  ok... how do you mean.. switch? physical on motherboardor in the software? I haven't seen any.... I have one physical external switch for VGA/AV....

I understand most of what you said... except how to get back to original bios without cd?

Sorry if I suck.... Smile
21.04.2011 17:27
Найти все сообщения Цитировать это сообщение
lolof Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 15.03.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #5
RE: Freezing after bios installation
Normaly, you should have a physical switch somewhere on the case or maybe inside the case.
This switch has to be used to choose on the bios you want to boot in.
You have to find this switch and toogle it and after your dc will boot in the original bios.
For this operation you do not need the dreamshell disc, you will need it if you want to flash the bios in the second chip, the one who is soldered on the original one.
If you cannot find the switch, you should open the dreamcast and look for the extra chip or the switch.
21.04.2011 21:16
Найти все сообщения Цитировать это сообщение
olleulv Не на форуме
Новичок
*

Сообщений: 9
Зарегистрирован: 18.04.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #6
RE: Freezing after bios installation
Thanks for your answer.
I havent located any switch.. but i have located the chip on the motherboard. Släp some wires from it. Whats my next step? Its useless without the ability to read discs.

Thanks again
22.04.2011 01:09
Найти все сообщения Цитировать это сообщение
lolof Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 15.03.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #7
RE: Freezing after bios installation
Do you see the soldered chip on the original one ?
Maybe the man who made the mod on your dreamcast didnt put a switch....
Maybe it is only wired. 2 wires must be put together to give access to the soldered chip and one wire must be remain alone. One of the 2 that are actually together should be connected to the remain one. You should better learn how this is build from here and find the good wires that have to be put together to give access to the original bios chip.

Read this thread, you will find Useful info :
http://www.assemblergames.com/forums/sho...hp?t=24880

Here the shematic :
http://www.dc-swat.ru/blog/hardware/16.html

Now, you can see that the wire who is coming from the leg 12 of the Soldered bios chip is put together with the wire soldered on the D501, you have to separate those 2 wires.
Then you should link the wire that come from the leg 12 from the original bios chip with the wire that is soldered on the D501 component.

If it works, you should put a on/on switch, it makes life easier.

If you cannot do it after reading those links, maybe we cann help you if you post some photos...

Good luck
(Последний раз сообщение было отредактировано 22.04.2011 в 01:48, отредактировал пользователь lolof.)
22.04.2011 01:25
Найти все сообщения Цитировать это сообщение
olleulv Не на форуме
Новичок
*

Сообщений: 9
Зарегистрирован: 18.04.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #8
RE: Freezing after bios installation
thanks! really appreciate your help!
I'll look in to it and get back to you.
I'm uploading a picture here.

http://www.picupload.us/images/imag0191.jpg
22.04.2011 01:55
Найти все сообщения Цитировать это сообщение
lolof Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 15.03.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #9
RE: Freezing after bios installation
I think it will be more complicate.....

Its looks like the original bios chip has been removed if i good see on the photo. if I am not wrong, you are not able to switch to the original bios!

It should normally be 2 chip, one on the other one, like the photo on the 2nd link i posted you before.
It seems that you will need a chip with a pre programed dc bios and that you will have to solder it yourself to get your dc to boot again!
Its a pity that the original bios chip has been removed!

Let see what mr. swat think about this.
(Последний раз сообщение было отредактировано 22.04.2011 в 02:26, отредактировал пользователь lolof.)
22.04.2011 02:13
Найти все сообщения Цитировать это сообщение
olleulv Не на форуме
Новичок
*

Сообщений: 9
Зарегистрирован: 18.04.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #10
RE: Freezing after bios installation
ok... I can confirm that it's one chip only...

Would it be easier for me to just go back to normal bios somehow?
22.04.2011 02:44
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #11
RE: Freezing after bios installation
It is bad and I do not understand why. The scheme is designed to work with 2 bios, the second just soldered on top.
This is intentional, since the BIOS firmware dangerous occupation, always have a chance to damage it.
If you had 2 bios, then you easy to switch them.

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 22.04.2011 в 10:20, отредактировал пользователь SWAT.)
22.04.2011 07:05
Вебсайт Найти все сообщения Цитировать это сообщение
lolof Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 15.03.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #12
RE: Freezing after bios installation
Without a new chip with the dreamcast bios your dreamcast will not boot.
At the moment, you have no bios in your dreamcast, it means no possibility to boot nor to programme a new bios chip from your dreamcast. You have to solder a new chip with pre programmed bios in your dreamcast. It is the only way to get your dreamcast to boot again.
You could also take this one out and ask someone to programme it for you and solder it back to your dc.
It is crazy to have removed the original one.
(Последний раз сообщение было отредактировано 22.04.2011 в 12:09, отредактировал пользователь lolof.)
22.04.2011 11:58
Найти все сообщения Цитировать это сообщение
olleulv Не на форуме
Новичок
*

Сообщений: 9
Зарегистрирован: 18.04.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #13
RE: Freezing after bios installation
OK...My Dreamcast does boot though. It freezes when inserting disc.
22.04.2011 13:03
Найти все сообщения Цитировать это сообщение
olleulv Не на форуме
Новичок
*

Сообщений: 9
Зарегистрирован: 18.04.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #14
RE: Freezing after bios installation
So,... any new thoughts?
Or does anyone know where to get a new prepared chip?

I've contacted the seller.. but got no response.

Cheers!
26.04.2011 23:02
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #15
RE: Freezing after bios installation
No luck Sad
You basically do not necessarily to get the same chip, you can take orig bios, or vice versa to solder this chip on another motherboard.

[Изображение: barbers.png]
27.04.2011 08:41
Вебсайт Найти все сообщения Цитировать это сообщение
olleulv Не на форуме
Новичок
*

Сообщений: 9
Зарегистрирован: 18.04.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #16
RE: Freezing after bios installation
OK.
One last question...
I've got a japanese dc-motherboard here. can I take the orig bios from it and replace the flashed defect one?
05.05.2011 15:57
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #17
RE: Freezing after bios installation
Yes, why not. Just check the bios they were working on the same voltage.

[Изображение: barbers.png]
06.05.2011 06:09
Вебсайт Найти все сообщения Цитировать это сообщение
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
Радуга Alternative Bios Soldering Points dragoncity 1 5681 13.01.2024 20:16
Посл. сообщение: chth96
  Question about dual bios mod chth96 3 5189 14.03.2021 14:08
Посл. сообщение: megavolt85
Подмигивает Last Dreamshell + Presets + Covers + Games + Installation G1-ATA & GD-IDE dragoncity 10 25552 02.02.2021 21:47
Посл. сообщение: Ro Magnus Larsson
Лампочка 29lv640D as BIOS? Is it possible? alponxo 1 4272 30.01.2021 10:15
Посл. сообщение: SWAT
  Freezing at bootloader with StarTech adapter Mu. 7 10692 08.03.2020 05:41
Посл. сообщение: fafadou
  Problem with bios flashing va0 using mx29f1610mc-10 cryptblood1986 22 28988 18.09.2019 23:07
Посл. сообщение: megavolt85
  BIOS FLASHER PROBLEM HELP SUWAT dreamcastfix 10 16360 01.08.2019 00:35
Посл. сообщение: megavolt85
  Dual bios issue Toe-Knee 2 12648 14.07.2018 19:26
Посл. сообщение: Toe-Knee
  Sega Dreamcast mod: Custom bios with switch, Overclock, IDE HDD, and SD Rellikami 4 15149 19.06.2018 00:31
Посл. сообщение: Rellikami
Лампочка DUAL BIOS PLUG AND PLAY dreamcastfix 4 12173 30.03.2018 15:08
Посл. сообщение: jacobsson

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)