Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
I broke my other dreamcast please help
Автор Сообщение
Gromber Не на форуме
Новичок
*

Сообщений: 11
Зарегистрирован: 03.08.2010
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #1
I broke my other dreamcast please help
i wanted to remplace the original bios with a pre-flashed rom.

I can´t do it work on a ntsc-u va1 (black sport), i tried two times, with different pre-flashed roms... I am afraid that I have broken my motherboard (some welded track) when i extract one of them, please help.

I use the image


of this tutorial http://www.mmmonkey.co.uk/console/images...44.jpgthis tutorial

Can someone give me some advice or new pics.
There are alternative points to use with some legs of the bios?

A dreamcast less in the world...
(Последний раз сообщение было отредактировано 29.04.2022 в 15:32, отредактировал пользователь SWAT.)
05.05.2012 00:33
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7125
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #2
RE: I broke my other dreamcast please help
http://www.dc-swat.ru/blog/hardware/16.html

[Изображение: barbers.png]
05.05.2012 08:17
Вебсайт Найти все сообщения Цитировать это сообщение
Gromber Не на форуме
Новичок
*

Сообщений: 11
Зарегистрирован: 03.08.2010
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #3
RE: I broke my other dreamcast please help
Thanks but i remove the original bios, and guide its different than multibios mod
(Последний раз сообщение было отредактировано 05.05.2012 в 19:51, отредактировал пользователь Gromber.)
05.05.2012 15:15
Найти все сообщения Цитировать это сообщение
alex Не на форуме
Ветеран
*****

Сообщений: 1273
Зарегистрирован: 11.07.2005
Рейтинг: 2
Сказал спасибо: 4
Поблагодарили 69 раз(а) в 53 сообщ.
Сообщение: #4
RE: I broke my other dreamcast please help
Gromber
Can you upload some pictures of your bios mod?

Здесь была подпись.
05.05.2012 22:35
Найти все сообщения Цитировать это сообщение
Gromber Не на форуме
Новичок
*

Сообщений: 11
Зарегистрирован: 03.08.2010
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #5
RE: I broke my other dreamcast please help
[Изображение: 3b72aa188681609.jpg] [Изображение: f043fa188681678.jpg] [Изображение: 1e6ae3188681745.jpg] [Изображение: d72c98188681783.jpg] [Изображение: 0702c6188681837.jpg]
06.05.2012 04:07
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7125
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #6
RE: I broke my other dreamcast please help
(05.05.2012 15:15)Gromber писал(а):  Thanks but i remove the original bios, and guide its different than multibios mod

It is no different, just you do not need a second resistor and a switch, and everything else the same way.

[Изображение: barbers.png]
08.05.2012 18:44
Вебсайт Найти все сообщения Цитировать это сообщение
Gromber Не на форуме
Новичок
*

Сообщений: 11
Зарегистрирован: 03.08.2010
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #7
RE: I broke my other dreamcast please help
any idea?
02.09.2012 01:51
Найти все сообщения Цитировать это сообщение
OzOnE Не на форуме
Пользователь
**

Сообщений: 65
Зарегистрирован: 20.07.2012
Рейтинг: 1
Сказал спасибо: 0
Поблагодарили 6 раз(а) в 5 сообщ.
Сообщение: #8
RE: I broke my other dreamcast please help
I think it's correct that you only need pin 1 (#RESET) and pin 44 (#WE) to be lifted as long as the chip is definitely pre-flashed.

Pin 1 can then be tied to VCC (3V3) pin 23, and pin 44 connected to pin 9 of the FlashROM.

@Gromber - What did you mean by "welded track"? Has a track or via lifted from the board? If so, which one?

You need to make sure that none of the pins are shorted to each other.
If you check with a multimeter, it's fairly easy to test between one pin and it's neighbour like this...

1+2...
2+3...
3+4... etc.

This must be done with the power OFF! (multimeter set to continuity / "diode" / "beep" setting).

Note that pins 32 and 33 will probably both be connected to ground, so they will test as shorted to each-other (this is normal).

Also, is that just flux across pins 3+4 of IC502 ("Flash")?

A very good tip is to use liquid flux when soldering...

I use a flux in a syringe. You can put quite a lot of flux across all the pins, then touch the soldering iron on each pin again.

The solder on the pins should flow very easily, just don't leave the iron on one pin for more than a few seconds (the flux will "boil off" after a while).

btw, let us know which pin / pad you think is broken. I could probably find an alternative solder point for you.

OzOnE.
(Последний раз сообщение было отредактировано 02.09.2012 в 05:16, отредактировал пользователь OzOnE.)
02.09.2012 05:14
Найти все сообщения Цитировать это сообщение
dreamlord Не на форуме
Новичок
*

Сообщений: 1
Зарегистрирован: 24.09.2012
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #9
RE: I broke my other dreamcast please help
@OzOnE (and all other people who can help!)

I desoldered my dreamcast BIOS chip perfectly and IT happened. One (the only one) of my solder points broke down and vanished into thin air. I've made a picture of course. It would be nice if one of you great people could try to find an alternative solder point. I've already destroyed a dreamcast before trying this bios replacement mod. Sad

Anyway here is the picture. The broken point is near point 23 and marked by me. I think the point is called "Q12" or "25" on the replacement bios.

Thank you really much for your time and help and reading this. I appreciate it!



Cheers
(Последний раз сообщение было отредактировано 29.04.2022 в 15:32, отредактировал пользователь SWAT.)
24.09.2012 23:04
Найти все сообщения Цитировать это сообщение
cybdyn Не на форуме
Ветеран
*****

Сообщений: 1368
Зарегистрирован: 20.12.2011
Рейтинг: 8
Сказал спасибо: 4
Поблагодарили 98 раз(а) в 75 сообщ.
Сообщение: #10
RE: I broke my other dreamcast please help
you are LUCKY! this pin is NC (not connected)...
25.09.2012 00:32
Найти все сообщения Цитировать это сообщение
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
  Japanese dreamcast VA0 - no picture, sound and VMU Boguś 2 1552 08.08.2023 15:33
Посл. сообщение: Boguś
  Dreamcast PCBs and Schematics aldair 0 1642 10.03.2023 06:46
Посл. сообщение: aldair
  OSSC at 970p on VGA: Grandia 2 Dreamcast aldair 0 1439 10.03.2023 02:10
Посл. сообщение: aldair
  KOF96 10th anniversary Edition/Dreamcast aldair 0 1432 07.03.2023 06:56
Посл. сообщение: aldair
  Samurai Shodown - hbmame / Dreamcast aldair 0 1508 25.02.2023 18:34
Посл. сообщение: aldair
  Bitfunx Ossc: full screen in all games (16X9) / Dreamcast aldair 0 1680 22.02.2023 01:58
Посл. сообщение: aldair
  DVD on Sega Dreamcast.Coming soon! aldair 0 1980 20.02.2023 17:12
Посл. сообщение: aldair
  Code: Veronica/ Showing 3D of the game in high quality on Led TV/ Dreamcast aldair 0 1749 19.02.2023 17:59
Посл. сообщение: aldair
  Solução definitiva para jogos RGB em cabo-VGA/Sega Dreamcast. aldair 0 1570 18.02.2023 18:05
Посл. сообщение: aldair
  Bleem! +OSSC on Sega Dreamcast: look like pc emulator. aldair 0 1861 16.02.2023 23:20
Посл. сообщение: aldair

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)