Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Flashing VA0 bios chip to load dreamshell from SD card.
Автор Сообщение
leetuser Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 14.12.2014
Рейтинг: 0
Сказал спасибо: 2
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #1
Flashing VA0 bios chip to load dreamshell from SD card.
Hello, I have a region free bios chip piggy backed on top of my retail bios. I would like to flash this chip to load dreamshell from SD card reader. When I try to flash the chip using dreamshell, I get an error saying that the chip is not writable. Can we flash va0 chips using dreamshell software? I was told my someone else in another forum that this wasn't possible, but I can't find any information related to the va0 chip specifically.
17.06.2015 06:57
Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #2
RE: Flashing VA0 bios chip to load dreamshell from SD card.
What is chip you use? MX29lv160?

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
17.06.2015 08:13
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #3
RE: Flashing VA0 bios chip to load dreamshell from SD card.
Any retail BIOS chip can't be flashed. It's a hardware limits.
You do switched chip before flashing? What you see on main screen of BIOS Flasher app after detect?

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 17.06.2015 в 11:04, отредактировал пользователь SWAT.)
17.06.2015 08:53
Вебсайт Найти все сообщения Цитировать это сообщение
leetuser Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 14.12.2014
Рейтинг: 0
Сказал спасибо: 2
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #4
RE: Flashing VA0 bios chip to load dreamshell from SD card.
I'm using a 5v mx29f16010mc-12 It's the 5v chip for the va0. I bought it pre flashed with the modified dev kit bios so it's already reagion free. But I wan't to switch it to DS boot loader.
17.06.2015 16:16
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #5
RE: Flashing VA0 bios chip to load dreamshell from SD card.
(17.06.2015 16:16)leetuser писал(а):  I'm using a 5v mx29f16010mc-12 It's the 5v chip for the va0. I bought it pre flashed with the modified dev kit bios so it's already reagion free. But I wan't to switch it to DS boot loader.

What you see on main screen of BIOS Flasher app after switch the chip and pressing detect button?

[Изображение: barbers.png]
18.06.2015 09:06
Вебсайт Найти все сообщения Цитировать это сообщение
leetuser Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 14.12.2014
Рейтинг: 0
Сказал спасибо: 2
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #6
RE: Flashing VA0 bios chip to load dreamshell from SD card.
[Изображение: LnX0xSF.jpg]

And if I try to write:
[Изображение: Czjly1w.png]
21.06.2015 07:00
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #7
RE: Flashing VA0 bios chip to load dreamshell from SD card.
Looks like you need switch the bios chip before write firmware.
Or if you really switch the chip, then seems your mx flash doesn't response to commands sent to his controller (bad connection?).

[Изображение: barbers.png]
21.06.2015 14:24
Вебсайт Найти все сообщения Цитировать это сообщение
ands Не на форуме
Опытный
****

Сообщений: 537
Зарегистрирован: 22.05.2006
Рейтинг: 0
Сказал спасибо: 42
Поблагодарили 31 раз(а) в 27 сообщ.
Сообщение: #8
RE: Flashing VA0 bios chip to load dreamshell from SD card.
first press the button "detect" shows the name of the chip
"writing fail" This means that bad soldering again need to solder
21.06.2015 17:38
Найти все сообщения Цитировать это сообщение
leetuser Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 14.12.2014
Рейтинг: 0
Сказал спасибо: 2
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #9
RE: Flashing VA0 bios chip to load dreamshell from SD card.
I bought this chip pre flashed. It has a region free bios pre installed on it and I'm booting the console with this chip, so I don't need to switch anything. I'm trying to flash the chip so that I can boot directly to dreamshell.

(21.06.2015 17:38)ands писал(а):  first press the button "detect" shows the name of the chip
"writing fail" This means that bad soldering again need to solder

When I press detect chip, that is what I see in my above screen shot.

I have a VA0 model dreamcast that I've installed a bios chip (obtained from Bad_Ad84). It's a VA0 board so wires going to 1 and 23 are swapped. Leg 1, 12, 23 raised.

The extra wires you see in the pictures are because I also have a older 4-wire mod chip installed on the retail bios chip. Could this be causing the problem? Here's some shots of my setup, but basically it's following the mmmonkey tutorial exactly except for what I mentioned since it's a VA0 chip/board.

[Изображение: 3cR9N6y.jpg]
(Последний раз сообщение было отредактировано 21.06.2015 в 18:42, отредактировал пользователь leetuser.)
21.06.2015 18:40
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #10
RE: Flashing VA0 bios chip to load dreamshell from SD card.
Your chip have different pinout.
On MX29LV160 the leg 44 it's a WE (write enable), but on your chip WE is on leg #1...
WE connected to the power?

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 21.06.2015 в 20:10, отредактировал пользователь SWAT.)
21.06.2015 20:10
Вебсайт Найти все сообщения Цитировать это сообщение
leetuser Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 14.12.2014
Рейтинг: 0
Сказал спасибо: 2
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #11
RE: Flashing VA0 bios chip to load dreamshell from SD card.
Right. It should have the resistor going to pin 44 in the picture. I've tried it both ways now and I still get the same thing on the flashing app.
21.06.2015 20:39
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #12
RE: Flashing VA0 bios chip to load dreamshell from SD card.
Ahh... MX29F1610 it's a JEDEC chip, it's supported experimentally.
Bad_Ad84 asked me to add support for this chip. Since I did not have a suitable configuration, he tested it himself. As far as I remember we had no success, and at some time he has other affairs and stops the testing. The latest version of the code, he never checked, but you did it Smile Unfortunately there is still no success.
If I'll have a suitable configuration, I would have tried to solve this problem. But for now I don't have VA0 board with BIOS mod.
In your case it's doing is dangerous, because you don't have a spare chip and if the current firmware is damaged, you will not be able to boot the console.

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 22.06.2015 в 09:54, отредактировал пользователь SWAT.)
22.06.2015 09:54
Вебсайт Найти все сообщения Цитировать это сообщение
leetuser Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 14.12.2014
Рейтинг: 0
Сказал спасибо: 2
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #13
RE: Flashing VA0 bios chip to load dreamshell from SD card.
This chip is piggy backed on top of the retail chip, so I could always boot the console with the retail bios chip.
22.06.2015 15:41
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #14
RE: Flashing VA0 bios chip to load dreamshell from SD card.
Good. But I can't work with this now, because has other unresolved issues. In any case remote testing it's really long time. I need this motherboard for best labour performance.

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 22.06.2015 в 16:49, отредактировал пользователь SWAT.)
22.06.2015 16:49
Вебсайт Найти все сообщения Цитировать это сообщение
 Сказали спасибо: leetuser
leetuser Не на форуме
Новичок
*

Сообщений: 13
Зарегистрирован: 14.12.2014
Рейтинг: 0
Сказал спасибо: 2
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #15
RE: Flashing VA0 bios chip to load dreamshell from SD card.
(22.06.2015 16:49)SWAT писал(а):  Good. But I can't work with this now, because has other unresolved issues. In any case remote testing it's really long time. I need this motherboard for best labour performance.

Ok. Thanks for the information. If you ever need help, let me know. I think I'll move onto a va1 console for now
23.06.2015 02:38
Найти все сообщения Цитировать это сообщение
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
  Did anyone got to play Sonic Adventure 2 last story on dreamshell leonardorg 4 1047 31.01.2024 04:01
Посл. сообщение: leonardorg
Радуга Alternative Bios Soldering Points dragoncity 1 5681 13.01.2024 20:16
Посл. сообщение: chth96
  Dreamshell + SD card Serial Adapter state_product 0 1187 01.09.2023 19:30
Посл. сообщение: state_product
  128GB SD Card Dreamshell aldair 0 2562 22.08.2022 02:41
Посл. сообщение: aldair
  This IDE-SATA adapter would work in Dreamshell? Ro Magnus Larsson 2 3349 09.06.2022 09:42
Посл. сообщение: Ro Magnus Larsson
  Homebrew Games in HD IDE Dreamshell / Dreamcast aldair 6 10521 13.05.2022 03:30
Посл. сообщение: Ro Magnus Larsson
  Card not recognized news8019 7 6927 21.03.2022 20:57
Посл. сообщение: news8019
  SDCard serial Dreamshell Dolphin Blue Atomiswave-Dreamcast aldair 1 4936 15.11.2021 19:16
Посл. сообщение: nilfelix30
  Japanesse Visual Novels Compactibility List for IDE MOD Dreamshell Retrodream animekai 4 7871 03.07.2021 17:19
Посл. сообщение: chth96
  AES4ALL_NEODEBUG_BIOS-ISO 4GB Dreamshell IDE and SD/Dreamcast aldair 2 5063 21.03.2021 21:32
Посл. сообщение: aldair

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)