Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
88AS8040 IDE2SATA Chip
Автор Сообщение
andrews2kx Не на форуме
Новичок
*

Сообщений: 5
Зарегистрирован: 25.11.2014
Рейтинг: 0
Сказал спасибо: 3
Поблагодарили 3 раз(а) в 1 сообщ.
Сообщение: #1
Информация 88AS8040 IDE2SATA Chip
Hi.
A few months ago i developed one pcb called Dream IDe Reborn and i
registered here first to thanks to SWAT and your team, because if was not for Dreamshell, this job never was out of paper. Big Grin

v1
[Изображение: dream-ide-reborn-hd-no-seu-sega-dreamcas...p6nqew.jpg]

actually v2 with some improvments:
[Изображение: Dream%20IDE%20Reborn%20v2_zpsdo7hy3la.jpg]

Second because i want to share something.
Another day Me and Alexsandro (aldair) was talking about SATA adapters compatibility.

The simple green adapter has a small chip and i dont understand why this same adapter dont works if you just connect it with a ide cable, but works if you solder short wires.
Even in my pcb, without wires, this same adapter didnt works.

So, later i was looking a schematics of Startech´s adapter because it basically works if any console without problems. Works like a charm includes with my pcb:





So, i was looking for chip diagram to try to understand things and i found one scheme in a ps3devwiki site:

http://www.psdevwiki.com/ps3/88SA8040-TBC1

My job here is fix consoles and when i look that i jump from my chair and get a dead ps3 board in my shelf.

Take out original chip from an ide2sata bidirectional (this is NOT work in any console, because it haven´t master/slave selector - just "ide2sata" or "sata2ide") and soldered ps3 chip in place:

[Изображение: 13451190_10153474296270947_1394254892_n_zpslgs4vzwx.jpg]

[Изображение: 13473769_10153474296355947_1679553713_n_zpsseqvojki.jpg]

[Изображение: 13453874_10153474296110947_1125370202_n_zpsa0ahylfn.jpg]

[Изображение: 13479419_10153474122160947_872623746_n_zpsq09u9nro.jpg]


And it works like a charm!
PS3 chip code is 88A08040, Startech´s Adapter is 88AS8052. But both is same family, i checked pins before solder and runs ok.
Tested with 3,5" Western Digital 500gb Sata and 1,5", without any problem!

So i believe its a solution if you got a cheap ps3 dead board and already have ide mod installed. Smile

Cheers!
Andrews

Dream IDE Reborn!
http://www.gametrackssite.wordpress.com
09.09.2016 09:25
Вебсайт Найти все сообщения Цитировать это сообщение
 Сказали спасибо: SWAT , megavolt85 , aldair
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #2
RE: 88AS8040 IDE2SATA Chip
(09.09.2016 09:25)andrews2kx писал(а):  actually v2 with some improvments:

need v3, with this, this and this on board Wink

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
(Последний раз сообщение было отредактировано 10.09.2016 в 03:49, отредактировал пользователь megavolt85.)
10.09.2016 03:49
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: andrews2kx
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #3
RE: 88AS8040 IDE2SATA Chip
you can use JMH330S , i'm can't find datasheet, i have shematic PC motherboard with JMH330 (is Serial ATA Bridge Chip in master mode (JMH330S in slave mode))

See page 30


.pdf  Asus1201HA r1.0.pdf (Размер: 1.19 Мб / Загрузок: 17)

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
10.09.2016 17:34
Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #4
RE: 88AS8040 IDE2SATA Chip
example usage 88SA8040 in Blu-ray player
See page 46

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
(Последний раз сообщение было отредактировано 10.09.2016 в 22:54, отредактировал пользователь megavolt85.)
10.09.2016 22:53
Найти все сообщения Цитировать это сообщение
 Сказали спасибо: andrews2kx
andrews2kx Не на форуме
Новичок
*

Сообщений: 5
Зарегистрирован: 25.11.2014
Рейтинг: 0
Сказал спасибо: 3
Поблагодарили 3 раз(а) в 1 сообщ.
Сообщение: #5
RE: 88AS8040 IDE2SATA Chip
(10.09.2016 17:34)megavolt85 писал(а):  you can use JMH330S , i'm can't find datasheet, i have shematic PC motherboard with JMH330 (is Serial ATA Bridge Chip in master mode (JMH330S in slave mode))

See page 30

Thank you Megavolt! About building 1pcb - all in one:

I´m already buiding another pcb with a friend, but for bios. Still in development, because first prototypes have some issues that will we correct and test new pieces in next 15 days. Our idea is just clip, solder 2 or max 3 wires and play (but for now without prevision when will ready)

[Изображение: Dream%20Bios%20Revolution_zpsjiempqsp.jpg]

I will check your datasheets. Maybe i get draw something including sata directly.

Dream IDE Reborn!
http://www.gametrackssite.wordpress.com
11.09.2016 07:57
Вебсайт Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #6
RE: 88AS8040 IDE2SATA Chip
DREAM_BIOS_REVOLUTION is bad way. BIOS on Dream IDE Reborn board is good. Need add two test point and remove R532 from main board

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
12.09.2016 01:05
Найти все сообщения Цитировать это сообщение
dreamcastfix Не на форуме
Новичок
*

Сообщений: 11
Зарегистрирован: 12.09.2016
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 7 раз(а) в 2 сообщ.
Сообщение: #7
RE: 88AS8040 IDE2SATA Chip
(12.09.2016 01:05)megavolt85 писал(а):  DREAM_BIOS_REVOLUTION is bad way. BIOS on Dream IDE Reborn board is good. Need add two test point and remove R532 from main board

The idea is simply to facilitate the installation of DualBIOS. I can not believe the way it is done today can not be improved.

[Изображение: fz7o5.jpg]

In fact, the board will only be fitted onto the MPR-XXXX harvest, which should have the pin 12 up and connected to the plate, a point with the WE signal is also necessary, simple, in a few minutes modbios / dual bios / region free installed!

I could not understand what it meant to be necessary to remove R532 on the main board?

In fact this board is nothing more than a dip44 adapter TSOP48 with a voltage regulator (for VA0 model plates with 5V voltage) and two resistors 10k fitted with a system that facilitates the connection of the MPR-XXXX, I did not understand why it would be bad idea to facilitate the mod as is done today.

I would also emphasize that the MX chip used is recommended by SWAT in UC's list compatible, could not understand where it would be based on the opnion that this card is a wrong way.

Could you tell us why you think that?Huh
12.09.2016 05:17
Вебсайт Найти все сообщения Цитировать это сообщение
andrews2kx Не на форуме
Новичок
*

Сообщений: 5
Зарегистрирован: 25.11.2014
Рейтинг: 0
Сказал спасибо: 3
Поблагодарили 3 раз(а) в 1 сообщ.
Сообщение: #8
RE: 88AS8040 IDE2SATA Chip
I want complete saying that here in Brazil, per example, many people refuses to leave gd rom because they still working. So if user want to play some game that Dreamshell still can´t run, they can use in normal way. Thats why i made Reborn for solder in the bottom of pcb.

Dream IDE Reborn!
http://www.gametrackssite.wordpress.com
12.09.2016 05:35
Вебсайт Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1168 раз(а) в 726 сообщ.
Сообщение: #9
RE: 88AS8040 IDE2SATA Chip
I think megavolt85 mean some simples way with one PCB instead of two.
You can place MX chip on IDE Reborn, that has almost all pins for it, because the BIOS used the same bus (G1) as GD drive.
Solder the one PCB is easier than solder a two PCB. You make one work 2 times.

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 12.09.2016 в 06:35, отредактировал пользователь SWAT.)
12.09.2016 06:34
Вебсайт Найти все сообщения Цитировать это сообщение
andrews2kx Не на форуме
Новичок
*

Сообщений: 5
Зарегистрирован: 25.11.2014
Рейтинг: 0
Сказал спасибо: 3
Поблагодарили 3 раз(а) в 1 сообщ.
Сообщение: #10
RE: 88AS8040 IDE2SATA Chip
(12.09.2016 06:34)SWAT писал(а):  I think megavolt85 mean some simples way with one PCB instead of two.
You can place MX chip on IDE Reborn, that has almost all pins for it, because the BIOS used the same bus (G1) as GD drive.
Solder the one PCB is easier than solder a two PCB. You make one work 2 times.

Many thanks for that. I will check bottom pins for bios and consider it in a next revision.

Dream IDE Reborn!
http://www.gametrackssite.wordpress.com
12.09.2016 06:39
Вебсайт Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #11
RE: 88AS8040 IDE2SATA Chip
WARNING. need remove R532 from main board

Test point numeration

[Изображение: attachment.php?aid=561]


HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
(Последний раз сообщение было отредактировано 12.09.2016 в 19:24, отредактировал пользователь megavolt85.)
12.09.2016 19:22
Найти все сообщения Цитировать это сообщение
dreamcastfix Не на форуме
Новичок
*

Сообщений: 11
Зарегистрирован: 12.09.2016
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 7 раз(а) в 2 сообщ.
Сообщение: #12
RE: 88AS8040 IDE2SATA Chip
(12.09.2016 19:22)megavolt85 писал(а):  WARNING. need remove R532 from main board

Test point numeration

[Изображение: attachment.php?aid=561]


Now I understand, you mean that you need to remove R532 when using the chip mx on board IDE Dream Reborn?

The test made with integrated circuit MX29LV160 CBTC-70G, it was enough just to follow the pinout, and it was not necessary to remove any resistor ...

https://www.youtube.com/watch?v=QbkZeoi3...e=youtu.be



(Последний раз сообщение было отредактировано 12.09.2016 в 23:33, отредактировал пользователь dreamcastfix.)
12.09.2016 23:23
Вебсайт Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #13
RE: 88AS8040 IDE2SATA Chip
Цитата:Now I understand, you mean that you need to remove R532 when using the chip mx on board IDE Dream Reborn?

If you use my diagram, then R532 needs to be deleted, otherwise both BIOS can be activated at the same time

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
12.09.2016 23:38
Найти все сообщения Цитировать это сообщение
dreamcastfix Не на форуме
Новичок
*

Сообщений: 11
Зарегистрирован: 12.09.2016
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 7 раз(а) в 2 сообщ.
Сообщение: #14
RE: 88AS8040 IDE2SATA Chip
(12.09.2016 06:34)SWAT писал(а):  I think megavolt85 mean some simples way with one PCB instead of two.
You can place MX chip on IDE Reborn, that has almost all pins for it, because the BIOS used the same bus (G1) as GD drive.
Solder the one PCB is easier than solder a two PCB. You make one work 2 times.

Thank you for your attention, I am an admirer of his work with DreamshellBig Grin
12.09.2016 23:56
Вебсайт Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #15
RE: 88AS8040 IDE2SATA Chip
WARNING. don't use MX29LV160 on VA0 motherboard
on VA0 board all addres and data lines have 5V logic level
for VA0 use this diagram
added pin 14 (write protect), VCC from P166 (+5v)

[Изображение: attachment.php?aid=562]


HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
(Последний раз сообщение было отредактировано 13.09.2016 в 02:01, отредактировал пользователь megavolt85.)
13.09.2016 01:54
Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #16
RE: 88AS8040 IDE2SATA Chip
[Изображение: attachment.php?aid=568]


HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
13.09.2016 02:46
Найти все сообщения Цитировать это сообщение
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #17
RE: 88AS8040 IDE2SATA Chip
88SA8052-A1

Код:
pin 33 - T0          vendor ID (need PD 10 kOm)
pin 34 - T1          vendor ID/SATA LED# (need PU 10 kOm to VDD2 (3V3))
pin 35 - T2          PD: disable SSC     PU: enable SSC (int PD)
pin 36 - T3          clock speed     PD: 20MHz     PU: 25MHz    
pin 37 - T4          clock speed (need PD 10 kOm)
pin 38 - T5          fix UDMA mode     PD: monitor set feature     PU: fixes its UDMA mode
pin 39 - T6          power mode     PD: disable     PU: enable
pin 40 - T7          SATA mode     PD: 1.5 Gbps     PU: 3.0 Gbps
pin 52 - T8          SIGNATURE FIS     PD: transformer from registers     PU: force bit4 to 1

pin 18          pin 19          pin 20
CNFG0           CNFG1           CNFG2

  PD              PD               PD          Device mode 100 MB/s
  PU              PD               PD          Device mode 133 MB/s
  PD              PU               PD          Device mode 150 MB/s
  PD              PU               PU          Host mode 150 MB/s

*PD - pool down (connect to GND over resistor 10 kOm)
*PU - pool up (connect to VCC2(3.3 V) over resistor 10 kOm)

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
(Последний раз сообщение было отредактировано 13.09.2016 в 05:09, отредактировал пользователь megavolt85.)
13.09.2016 05:04
Найти все сообщения Цитировать это сообщение
dreamcastfix Не на форуме
Новичок
*

Сообщений: 11
Зарегистрирован: 12.09.2016
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 7 раз(а) в 2 сообщ.
Сообщение: #18
RE: 88AS8040 IDE2SATA Chip
I re-designed this project simply because it could be improved and no one had done it, and also wanted to prove the concept of running it all on one board.





https://imgur.com/gallery/rsbHw4r

I'm working on a new board that is already in the final stage of production that includes on the same board the modbios and an adapter ide / sata and do not need to cut the carcass, this is my goal, a preview can be seen here

preview https://imgur.com/gpRJaZu

next https://imgur.com/zthv7mr
(Последний раз сообщение было отредактировано 17.10.2018 в 18:30, отредактировал пользователь dreamcastfix.)
17.10.2018 18:28
Вебсайт Найти все сообщения Цитировать это сообщение
 Сказали спасибо: megavolt85 , jacobsson , SWAT
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
  FTDI 232R Chip + AES4ALL= prefetch_Dreamcast aldair 8 12437 16.11.2020 03:07
Посл. сообщение: aldair
  Ok to use 3v flash chip on VA0 board? Poknatus 5 15632 21.04.2018 19:15
Посл. сообщение: thameslink
  Chip Mx29lv160_Dreamcast aldair 0 5747 29.04.2016 13:46
Посл. сообщение: aldair
  Question regarding BIOS mod on VA0, with chip MX29LV160T RogerWilco 1 8830 14.12.2015 09:10
Посл. сообщение: SWAT
  Flashing VA0 bios chip to load dreamshell from SD card. leetuser 14 44015 23.06.2015 02:38
Посл. сообщение: leetuser
  Mod chip bios and CF card on Dreamcast. aldair 0 17018 09.07.2014 07:33
Посл. сообщение: aldair
  Bios mod and 4 wire mod chip....can they be used together? segadreamcaster 9 33859 12.05.2012 01:24
Посл. сообщение: segadreamcaster
  bios chip question Cyrix 1 9624 13.11.2011 11:03
Посл. сообщение: SWAT

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)