Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Sega Dreamcast mod: Custom bios with switch, Overclock, IDE HDD, and SD
Автор Сообщение
Rellikami Не на форуме
Новичок
*

Сообщений: 5
Зарегистрирован: 06.06.2018
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #1
Sega Dreamcast mod: Custom bios with switch, Overclock, IDE HDD, and SD
I had started on this months ago and just recently had time to finish one up, i have 1 more VA1 console and a VA0 i plan on doing these mods to.
it is currently running Japanesecake's latest bios with DEV boot and running a copy of dreamshell from SD with the boot cd, all games i have used are running great from a 32GB CF card with external power( could not get my IDE2SATA adapters to work.)
I decided against doing a internal VGA or sound jack mod because space is a premium and finding what i would call a good place to put it without a psu mod is a pain, and the cables are cheap as chips as of recent.
I have this one done even put a new battery and reset-able fuse on the controller board. I only plan to open it up once more because i want to ad a reset button.

I did start on the va0 probably the one i will keep and not sell, i know 3v flash isn't supposed to play well with them, though I wired it up to get power from 3v and it seems to work fine flashes and boots with no issues.
(Последний раз сообщение было отредактировано 16.06.2018 в 20:04, отредактировал пользователь Rellikami.)
16.06.2018 20:02
Найти все сообщения Цитировать это сообщение
fafadou Не на форуме
Опытный
****

Сообщений: 856
Зарегистрирован: 07.03.2017
Рейтинг: 1
Сказал спасибо: 1126
Поблагодарили 89 раз(а) в 82 сообщ.
Сообщение: #2
RE: Sega Dreamcast mod: Custom bios with switch, Overclock, IDE HDD, and SD
No picture of overclock, we I see your weldings, I imagine it was a huge battle.

The va0 have a different system cooler for sh4 and pvr ?
17.06.2018 12:47
Найти все сообщения Цитировать это сообщение
Rellikami Не на форуме
Новичок
*

Сообщений: 5
Зарегистрирован: 06.06.2018
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #3
RE: Sega Dreamcast mod: Custom bios with switch, Overclock, IDE HDD, and SD
(17.06.2018 12:47)fafadou писал(а):  No picture of overclock, we I see your weldings, I imagine it was a huge battle.

The va0 have a different system cooler for sh4 and pvr ?

i have done some horrible things to the internals of other gaming devices.
Confused
It normally turns out well though! Big Grin

I removed the resistor on the bottom (r331) instead of lifting the pin on the chip. it is much easier to solder to and less risk of breaking a pin.
http://www.acidmods.com/forum/index.php?topic=44162.0


The VA0 has a single blower cooler for both heat sinks with a metal fan and heatpipes, i may try and push past 240Mhz ( maybe 270Mhz?) when i get a chance to work more on it. need to order different oscillators and copper shims the appropriate thickness to replace the cooling pads also might add some extra fans.

I have some decent Va0 pictures for who may want to see the overall internals.
(Последний раз сообщение было отредактировано 18.06.2018 в 00:49, отредактировал пользователь Rellikami.)
18.06.2018 00:36
Найти все сообщения Цитировать это сообщение
fafadou Не на форуме
Опытный
****

Сообщений: 856
Зарегистрирован: 07.03.2017
Рейтинг: 1
Сказал спасибо: 1126
Поблагодарили 89 раз(а) в 82 сообщ.
Сообщение: #4
RE: Sega Dreamcast mod: Custom bios with switch, Overclock, IDE HDD, and SD
the result in your gameboy is great !

How have you overclock the SH4 finally remove the jumper R331 or the lift the pin of IC305 ?
18.06.2018 18:32
Найти все сообщения Цитировать это сообщение
Rellikami Не на форуме
Новичок
*

Сообщений: 5
Зарегистрирован: 06.06.2018
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #5
RE: Sega Dreamcast mod: Custom bios with switch, Overclock, IDE HDD, and SD
(18.06.2018 18:32)fafadou писал(а):  the result in your gameboy is great !

How have you overclock the SH4 finally remove the jumper R331 or the lift the pin of IC305 ?

I used the jumper, if I ever wanted to undo it i can just remove it and bridge the juper back.
The jumper is much more safe than lifting the pin.
19.06.2018 00:31
Найти все сообщения Цитировать это сообщение
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
Радуга Alternative Bios Soldering Points dragoncity 1 5637 13.01.2024 20:16
Посл. сообщение: chth96
  Japanese dreamcast VA0 - no picture, sound and VMU Boguś 2 1511 08.08.2023 15:33
Посл. сообщение: Boguś
  Dreamcast PCBs and Schematics aldair 0 1611 10.03.2023 06:46
Посл. сообщение: aldair
  OSSC at 970p on VGA: Grandia 2 Dreamcast aldair 0 1414 10.03.2023 02:10
Посл. сообщение: aldair
  KOF96 10th anniversary Edition/Dreamcast aldair 0 1410 07.03.2023 06:56
Посл. сообщение: aldair
  Samurai Shodown - hbmame / Dreamcast aldair 0 1490 25.02.2023 18:34
Посл. сообщение: aldair
  Bitfunx Ossc: full screen in all games (16X9) / Dreamcast aldair 0 1651 22.02.2023 01:58
Посл. сообщение: aldair
  DVD on Sega Dreamcast.Coming soon! aldair 0 1945 20.02.2023 17:12
Посл. сообщение: aldair
  Code: Veronica/ Showing 3D of the game in high quality on Led TV/ Dreamcast aldair 0 1720 19.02.2023 17:59
Посл. сообщение: aldair
  Solução definitiva para jogos RGB em cabo-VGA/Sega Dreamcast. aldair 0 1552 18.02.2023 18:05
Посл. сообщение: aldair

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)