Тема закрыта 
 
Рейтинг темы:
  • Голосов: 2 - Средняя оценка: 5
  • 1
  • 2
  • 3
  • 4
  • 5
ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
Автор Сообщение
aldair Не на форуме
Опытный
****

Сообщений: 723
Зарегистрирован: 03.02.2012
Рейтинг: 7
Сказал спасибо: 81
Поблагодарили 247 раз(а) в 182 сообщ.
Сообщение: #161
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
(18.01.2023 04:09)fafadou писал(а):  Today's tests Smile

Every game I tried have a good loop now, so I guess you have find the issue dear @Swat Big Grin

Revolt - > still ok but distorsion until loop
Good preset for kao : 0x8c00000100 memory preset, behind the loader, cdda, no IRQ, TMU2 without dma, no crash but quite distorsion until loop, I played 3 levels !
Skies of arcadia -> intro freeze at luna's animal like gdemu clone, run well with 0.6.11_se
puyo puyo 4 -> loop is good here too, but distorsion like kao

sega rally 2 black screen.

@aldair could give a try with shadow gangs or share your preset for neo geo cd games please ?
GDI NEO4ALL:
https://www.mediafire.com/folder/6m9j8x8...eo4all+gdi
Then I'll make a video showing it!
shadow gangs works on low without dma.
(Последний раз сообщение было отредактировано 20.01.2023 в 06:22, отредактировал пользователь aldair.)
20.01.2023 06:17
Найти все сообщения
fafadou На форуме
Опытный
****

Сообщений: 857
Зарегистрирован: 07.03.2017
Рейтинг: 1
Сказал спасибо: 1129
Поблагодарили 89 раз(а) в 82 сообщ.
Сообщение: #162
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
(20.01.2023 06:17)aldair писал(а):  GDI NEO4ALL:
https://www.mediafire.com/folder/6m9j8x8...eo4all+gdi
Then I'll make a video showing it!
shadow gangs works on low without dma.

Sure, share the video Smile

Ok no dma for shadow gangs. thank you.
20.01.2023 12:23
Найти все сообщения
ManCloud Не на форуме
Новичок
*

Сообщений: 6
Зарегистрирован: 20.01.2023
Рейтинг: 0
Сказал спасибо: 1
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #163
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
Hello,

I'm new here and registered because me and a friend of mine have a very strange behavior with the new ISO Loader and our setup.

Our Setup is like follows:
- GD-IDE adapter by DragonCity https://dragoncity17.wordpress.com/2018/...st-gd-ide/
- IDE2CF Adapter (GSDGV)
- CF2SD Adapter (Chenyang)

This setup works as intended with the RetroDream pack from DragonCity (therefore DreamShell 4.0 RC4).

But when i update to DS 4 RC5, i can't get a single game to boot.
Regardless of GDI, OPT, ISO... it just won't boot.

The ISO Loader starts but then freezes after printing "Executing...".

I can then only reboot the console.

I tried Donald Duck - Quack Attack and 101 Dalmatians for this.
Both worked flawless with RC4 and won't boot with RC5.

If there is a way to debug this and supply logs or whatever, i'd be pleased to provide them ^^

Greetings
20.01.2023 13:24
Найти все сообщения
fafadou На форуме
Опытный
****

Сообщений: 857
Зарегистрирован: 07.03.2017
Рейтинг: 1
Сказал спасибо: 1129
Поблагодарили 89 раз(а) в 82 сообщ.
Сообщение: #164
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
In my memories, i had simply replace DS folder, maybe copy the DS_CORE.bin from
RC5 to your root. But for me, it's the same file.
20.01.2023 20:50
Найти все сообщения
fafadou На форуме
Опытный
****

Сообщений: 857
Зарегистрирован: 07.03.2017
Рейтинг: 1
Сказал спасибо: 1129
Поблагодарили 89 раз(а) в 82 сообщ.
Сообщение: #165
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
New tests :

Still not boot shadow gangs even with no dma no cdda...

The flinstone : game crash when we start a race even without cdda.

Didn't try in low level yet.
21.01.2023 15:28
Найти все сообщения
ManCloud Не на форуме
Новичок
*

Сообщений: 6
Зарегистрирован: 20.01.2023
Рейтинг: 0
Сказал спасибо: 1
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #166
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
(20.01.2023 20:50)fafadou писал(а):  In my memories, i had simply replace DS folder, maybe copy the DS_CORE.bin from
RC5 to your root. But for me, it's the same file.

Its not that i wasn't able to update to RC5 but the ISOLoader Beta 7, Beta 9 and Beta 10 all show the same behavior: they get stuck after printing "Executing..."

in RC4 i can't even see the sceen as its already gone the moment something is printed.

So it seems there is some issue here.

But unfortunately there is no additional print and the controller no longer reacts afterwards.

i uploaded a video to show both szenarios...
Only difference is, one has RC4 and the other RC5 folder.

https://youtu.be/JFht3Ipl9hI
(Последний раз сообщение было отредактировано 22.01.2023 в 04:49, отредактировал пользователь ManCloud.)
22.01.2023 04:26
Найти все сообщения
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1169 раз(а) в 727 сообщ.
Сообщение: #167
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
(22.01.2023 04:26)ManCloud писал(а):  
(20.01.2023 20:50)fafadou писал(а):  In my memories, i had simply replace DS folder, maybe copy the DS_CORE.bin from
RC5 to your root. But for me, it's the same file.

Its not that i wasn't able to update to RC5 but the ISOLoader Beta 7, Beta 9 and Beta 10 all show the same behavior: they get stuck after printing "Executing..."

in RC4 i can't even see the sceen as its already gone the moment something is printed.

So it seems there is some issue here.

But unfortunately there is no additional print and the controller no longer reacts afterwards.

i uploaded a video to show both szenarios...
Only difference is, one has RC4 and the other RC5 folder.

https://youtu.be/JFht3Ipl9hI

This is not the DreamShell, this is RetroDream with a part of DreamShell ISO Loader code. And RetroDream support only up to RC4.
With new loaders it should have very limited backward compatibility and seems fully broken now though I tried to keep it.
To use all new features of the new ISO Loader, you should use DreamShell 4.0.0 RC5+ while author of RetroDream not updated it.

[Изображение: barbers.png]
22.01.2023 10:23
Вебсайт Найти все сообщения
 Сказали спасибо: ManCloud , fafadou , Ro Magnus Larsson
ManCloud Не на форуме
Новичок
*

Сообщений: 6
Зарегистрирован: 20.01.2023
Рейтинг: 0
Сказал спасибо: 1
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #168
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
Thank you for your answer...

But even if i try to boot from RC5 directly i get the exact same error (sometimes even worse as the console resets itself the moment i select the game)

so i dont believe its an issue of retrodream... i came up with retrodream way later and only, because it has presets for the games.

And depending in the config i use for the game, somethimes i even only get a black screen.

to show you: here i only have RC5 on my card.
https://youtu.be/XoQiI4ksdw8
(Последний раз сообщение было отредактировано 22.01.2023 в 16:53, отредактировал пользователь ManCloud.)
22.01.2023 16:37
Найти все сообщения
megavolt85 Не на форуме
Супермодератор
******

Сообщений: 3065
Зарегистрирован: 24.03.2012
Рейтинг: 37
Сказал спасибо: 179
Поблагодарили 1510 раз(а) в 893 сообщ.
Сообщение: #169
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
(20.01.2023 13:24)ManCloud писал(а):  Our Setup is like follows:
- GD-IDE adapter by DragonCity https://dragoncity17.wordpress.com/2018/...st-gd-ide/
- IDE2CF Adapter (GSDGV)
- CF2SD Adapter (Chenyang)

I have a G1ATA adapter from dragoncity, and I tried three SATA2IDE adapters, but DreamShell did not boot with any, although this adapter boots without problems with an IDE HDD.
dragoncity checked before sending and the sata adapter worked for him without problems.
so that's what I'm writing this for, for unknown reasons, some consoles are not compatible with different converters, but all consoles always work well with IDE HDD and the problem is not in the software or adapter from dragoncity

HKT-3030, Bios mod, SD mod, VGA internal mod, G1ATA mod, Region changer mod, PSU mod
22.01.2023 19:55
Найти все сообщения
 Сказали спасибо: fafadou
ManCloud Не на форуме
Новичок
*

Сообщений: 6
Зарегистрирован: 20.01.2023
Рейтинг: 0
Сказал спасибо: 1
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #170
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
I tested:
- 102 Dalmatians
- Donald Duck - Quack Attack
- Grandia II
- Legacy of Kain - Soul Reaver
- Star Wars - Episode I - Racer

And all of them run completely fine with RC4 setup but wont boot with RC5.
22.01.2023 22:21
Найти все сообщения
 Сказали спасибо: luizroz
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1169 раз(а) в 727 сообщ.
Сообщение: #171
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
(22.01.2023 22:21)ManCloud писал(а):  I tested:
- 102 Dalmatians
- Donald Duck - Quack Attack
- Grandia II
- Legacy of Kain - Soul Reaver
- Star Wars - Episode I - Racer

And all of them run completely fine with RC4 setup but wont boot with RC5.

0.6.6+ loaders form here works?

After some first beta's in 0.8.0 I removed IDE re-init at first time call of GD syscalls. Looks like you freeze at first data request.
Have you USB->Serial cable?

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 23.01.2023 в 09:26, отредактировал пользователь SWAT.)
23.01.2023 09:17
Вебсайт Найти все сообщения
luizroz Не на форуме
Пользователь
**

Сообщений: 27
Зарегистрирован: 02.04.2019
Рейтинг: 0
Сказал спасибо: 91
Поблагодарили 4 раз(а) в 3 сообщ.
Сообщение: #172
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
(22.01.2023 22:21)ManCloud писал(а):  I tested:
- 102 Dalmatians
- Donald Duck - Quack Attack
- Grandia II
- Legacy of Kain - Soul Reaver
- Star Wars - Episode I - Racer

And all of them run completely fine with RC4 setup but wont boot with RC5.
For me
with RC4:
- 102 Dalmatians freeze during gameplay with HDD;
- 102 Dalmatians works during gameplay with SD;

Dreamcast NTSC, HDD Mod, BIOS Mod
Dreamcast NTSC, HDD Mod, BIOS Mod, SD Mod
23.01.2023 15:18
Найти все сообщения
fafadou На форуме
Опытный
****

Сообщений: 857
Зарегистрирован: 07.03.2017
Рейтинг: 1
Сказал спасибо: 1129
Поблагодарили 89 раз(а) в 82 сообщ.
Сообщение: #173
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
We finished and translated grandia 2 with RC4 with @Dragoncity (and we had a crash with a gdemu clone during test so I love dreamshell more than before Big Grin ) some years ago now.
I'll try it with RC5 this evening but be careful about the good preset to avoid issues like it looks like with 102 dalmatians.
23.01.2023 17:45
Найти все сообщения
ManCloud Не на форуме
Новичок
*

Сообщений: 6
Зарегистрирован: 20.01.2023
Рейтинг: 0
Сказал спасибо: 1
Поблагодарили 1 раз(а) в 1 сообщ.
Сообщение: #174
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
(23.01.2023 09:17)SWAT писал(а):  0.6.6+ loaders form here works?
I'll test and report back

edit:
6.6 - works
6.9 beta1 - works
6.10 - works
6.11 - works

All tested with Star Wars - Episode 1 Racer

If i shall test with another game, just tell me.

(23.01.2023 09:17)SWAT писал(а):  Have you USB->Serial cable?
plenty ^^ i'm an electronical engineer. If necessary i'll build one
(Последний раз сообщение было отредактировано 23.01.2023 в 23:11, отредактировал пользователь ManCloud.)
23.01.2023 22:50
Найти все сообщения
fafadou На форуме
Опытный
****

Сообщений: 857
Зарегистрирован: 07.03.2017
Рейтинг: 1
Сказал спасибо: 1129
Поблагодарили 89 раз(а) в 82 сообщ.
Сообщение: #175
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
Grandia 2 run for me with rc5 :
Preset from @dragoncity's liste non dma memory preset 0xcff0000
Even in true dma.

Exploring further memories preset for the flinstone and now i'm able to start a race but it's unplayable.

Edit : find the good preset for the flinstone ! Smile
True dma memory : 0xcfe8000
Cdda tmu1 dma
no irq

The game is not totally smooth, but i guess it's normal because it's an unreleased. The game is playable, i finish some races.

Still the same issue data tranfert not totally good as 0.6.11_se is and cdda has a little distorsion.
But loops are good Big Grin

Edit 2 : i tried UEFA striker, same preset as UEFA dream soccer :
True dma, 0x8C000100 | IRQ | Direct | Behind the Loader | DMA TMU1 | CDDA
A lot of distorsion but for me it's good Smile

Edit 3 : sturmwind has the read error message when you start a game, it's the better result i have with rc5 Smile
But no music during fmv and i'm sure i've already have them with previous rc5 beta loader (at least the first one). It may be good to check @swat if you Can, i Can share m'y iso if you think there is something interesting to find.
https://mega.nz/file/lvIQXQbQ#hpXFXxcCTt...bAyUlV0pmc
(Последний раз сообщение было отредактировано 24.01.2023 в 14:35, отредактировал пользователь fafadou.)
24.01.2023 02:21
Найти все сообщения
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1169 раз(а) в 727 сообщ.
Сообщение: #176
Информация RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
Not sure why, but my CF 128GB broken now. I probably tortured it Smile)
I have an 8GB spare yet, so the work will continue, but the tests will become even more difficult.
I ordered another one for 128 GB from Ali, I hope it will be normal, but I will receive the parcel only in March.
Unfortunately in our country CF cards have risen in price a lot and now this one costs 3-4 times more than what I bought it for.

[Изображение: attachment.php?aid=1133]


Прикрепления
.jpg  IMG_3690.JPG (Размер: 350.96 Кб / Загрузок: 199)

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 25.01.2023 в 08:14, отредактировал пользователь SWAT.)
25.01.2023 08:06
Вебсайт Найти все сообщения
 Сказали спасибо: fafadou
fafadou На форуме
Опытный
****

Сообщений: 857
Зарегистрирован: 07.03.2017
Рейтинг: 1
Сказал спасибо: 1129
Поблагодарили 89 раз(а) в 82 сообщ.
Сообщение: #177
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
Huh Damn !
I have only a micro sd compact flash converter and wince games don't work with it, but if you need, I can send it to you for free, with a sd card too. Tell me in pm.


I try some wince games with cdda, and I have everytime the message failed! during the boot, it means this version can handle the wince games with cdda ?
25.01.2023 12:27
Найти все сообщения
SWAT Не на форуме
Администратор
*******

Сообщений: 7126
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 130
Поблагодарили 1169 раз(а) в 727 сообщ.
Сообщение: #178
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
Big update - https://github.com/DC-SWAT/DreamShell/releases

- Improve UI for ISO Loader app (scrollbar, icons, menu).
- Added VMU emulation feature settings for ISO Loader app (experimental).
- Added new feature to ISO Loader for capture high quality screenshots (experimental).
- Improve PIO read/write for IDE loader and FAT.
- Cleanup core code from unneeded locking.
- Fixes for GUI resources and library.
- Fixed network support and initialize network at startup if have BBA.

No changes for games compatibility.
VMU dumps should puts to /vmu/dump001.vmd or /DS/vmu/dump001.vmd with up to 999 number.
Screenshot writes to /screenshot or /DS/screenshot with auto naming.

See examples for high quality screenshots without compression captured directly from video frame buffer:
https://mega.nz/file/X0pHnQwS#1bBwzwuuAV...kPLsvY9BD8

[Изображение: barbers.png]
(Последний раз сообщение было отредактировано 25.01.2023 в 16:12, отредактировал пользователь SWAT.)
25.01.2023 15:58
Вебсайт Найти все сообщения
 Сказали спасибо: pcwzrd13 , fafadou
pcwzrd13 Не на форуме
Продвинутый
***

Сообщений: 441
Зарегистрирован: 04.05.2017
Рейтинг: 2
Сказал спасибо: 145
Поблагодарили 206 раз(а) в 155 сообщ.
Сообщение: #179
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
Very cool update @SWAT! Since networking is now working, does that mean FTP support is planned? :-)

Also, how do you take screenshots? I assume a button combination?

Edit: Figured out the screenshots (Start + A +B). Smile Tested it in a few games. Works really well in Tony Hawk and Donald Duck Goin' Quakers. I was able to take a screenshot in Street Fighter Alpha 3 but it froze right after doing it. Tried Ready 2 Rumble but the game just froze with no screenshot taken. Also tried Soul Calibur but it didn't do anything at all when I pressed the button combination (maybe because this game needs low-level?).

[Изображение: game-scr-002.png]
[Изображение: game-scr-021.png]
[Изображение: game-scr-031.png]

Dreamcast Live | YouTube Channel | DreamShell IDE Compatibility List
(Последний раз сообщение было отредактировано 25.01.2023 в 18:43, отредактировал пользователь pcwzrd13.)
25.01.2023 16:27
Найти все сообщения
 Сказали спасибо: fafadou
fafadou На форуме
Опытный
****

Сообщений: 857
Зарегистрирован: 07.03.2017
Рейтинг: 1
Сказал спасибо: 1129
Поблагодарили 89 раз(а) в 82 сообщ.
Сообщение: #180
RE: ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5
I'll try it this evening.
outstanding works as always dear @Swat Smile
25.01.2023 20:05
Найти все сообщения
Тема закрыта 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
Звезда DreamShell v4.0.0 Release SWAT 121 18546 19.03.2024 19:45
Посл. сообщение: JohnOliv3ira
Радуга DreamShell на GitHub SWAT 69 97753 16.03.2024 17:14
Посл. сообщение: yo4yo4
  DreamShell on Hacker news SWAT 0 830 10.01.2024 06:52
Посл. сообщение: SWAT
  ISO Loader 0.7.x Beta megavolt85 1195 1279016 04.12.2023 19:10
Посл. сообщение: Ro Magnus Larsson
  Custom DreamShell Themes pcwzrd13 10 22896 23.11.2023 19:45
Посл. сообщение: pcwzrd13
  DreamShell v4.0 UI controls manual SWAT 0 1048 21.11.2023 07:04
Посл. сообщение: SWAT
Информация DreamShell в Discord SWAT 0 2993 06.03.2023 07:53
Посл. сообщение: SWAT
  New to Dreamshell/Retrodream DeanBMT 2 4143 26.01.2023 00:35
Посл. сообщение: DeanBMT
Баг ISO Loader 0.6.x Beta SWAT 482 568473 01.12.2022 13:50
Посл. сообщение: SWAT
  DreamShell с Алиэкспрес - почти нечего не работает - так и должно быть? Emigrant 11 9487 11.07.2022 09:07
Посл. сообщение: SWAT

Переход:


Пользователи просматривают эту тему: 6 Гость(ей)