thnx alot aldair for posting the photos of my mod, in fact I would have never succeeded without your tutorials & answers.
i also had many unsuccessful attempts, but the best way is to connect the adapter directly to the board, use a thick wire (really thick) for both ground connections on the ends, and even the wires between the points and the adapter needs to be thicker than usual small dia wires used in modchips etc.
another thing is you need to be really careful with the solder points on the adapter as its usually cheap quality and tends to get destroyed.
also I have not removed the sata socket as you can see from the adapter as I removed the metalic shell under the dc motherboard so it fits without a problem, then you can use male-female ends sata cable and route it to where ever you need
power required by the adapter is just 1 point 5v, the other is 12 v.
(05.12.2016 21:29)megavolt85 писал(а): [ -> ] next step.... enjoy
THX! by the way... Have news about "Holly" protection?
И не много по русский: (я хоть дупля и не режу в кодинге но все же хотел бы спросить) Как у вас дела обстоят с хоули протекшеном? По всему видно что вы с МиталиКом накопали что то безумно интересное но вот это "что то" нужно ломать... Можно хотя бы в общих чертах, либо сюда, либо в личку?
(05.12.2016 21:44)Zimada писал(а): [ -> ]Как у вас дела обстоят с хоули протекшеном? По всему видно что вы с МиталиКом накопали что то безумно интересное но вот это "что то" нужно ломать... Можно хотя бы в общих чертах, либо сюда, либо в личку?
пока топчемся на месте, я переделал свой дрим под брутилку и потихоньку уменьшаю размер бинарика проходящего проверку, на данный момент это 530 байт. Если получится уменьшить хотябы до 32-х байт будет проще понять что там за алгоритм
(05.12.2016 21:48)dragoncity писал(а): [ -> ]There is again "recycle.bin"
I think there is an escape before the name like that