Yes ...VERY EXPENSIVE...it's why I tested adaptator (CF>MicroSD) ^^
Can you give me the link of your adaptor (ide>sata) please?
Thank you
Adaptator (CF>MicroSD) Does not work wince games
Why you don't say that before...
!!! ^^
I have the same adaptator like you,but it can't boot...
I bought :
Adaptateur sata 1
and
Adaptateur sata 2
Don't boot...
(03.12.2016 00:30)dragoncity писал(а): [ -> ]In fact...it's the adaptator!!!
I bought 2 adaptators like this:
http://www.aliexpress.com/item/325746961...96147.html
The first doesn't work..block after detection...
And i tested the second...and it works!!!!!
So the first was damaged...
I don't think it's damaged, you have to test it in your PC. I already used dozens of them, never got a defective one.
However, those adapters are very sensitive to the length of wires, specially to GROUND ones, they have to be as smaller as possible.
It's sure !!!
I tested again the 2 adaptors,1 works and the second don't boot.
It's not the first time I have a problem with an adaptor of ali express,with my xbox one time I have no led and doesn't work.
This adaptor is not a good quality...
It works 6 times...and the 7 times...block after detection. And now block block...
Erf
So don't buy this with this seller..not good!
@Aldair
I saw your videos.
I have questions...
Why have you remove 2 caps and TXC?
Why you don't use 12V ?
Have you remove anything else?
(04.12.2016 14:18)dragoncity писал(а): [ -> ]Why have you remove 2 caps and TXC?
there is no empty seat.
(04.12.2016 14:18)dragoncity писал(а): [ -> ]Why you don't use 12V ?
adapter for power use only 5V
12V need only for HDD
there is no empty seat...what do you mean?
12v is for hdd I know,but he put hdd after...so need to put 12v.
(04.12.2016 14:39)dragoncity писал(а): [ -> ]there is no empty seat...what do you mean?
can't close of dreamcast
(04.12.2016 14:39)dragoncity писал(а): [ -> ]12v is for hdd I know,but he put hdd after...so need to put 12v.
you can solder 12V to HDD
if used 2.5" HDD then 12V don't used
Hooo..so it's necessary to REMOVE the 2 caps and TXC if I understand.
Maybe it's why my hard disk block..
(04.12.2016 15:04)megavolt85 писал(а): [ -> ] (04.12.2016 14:51)dragoncity писал(а): [ -> ]Maybe it's why my hard disk block..
No
OMG ..you are wrong ^^ (it's a joke
)
I remove the 2 caps...just 2 caps...and now it works !!!
But I don't remove TXC...
But with an other adaptor doesn't work..so it's depend..
Not good quality..
Edit: If I remove TXC...it's worst..don't detect !!
Edit 2 : Now the 2 adaptators works !!!
I know the problem...it's the adaptator...and it's a ground solder...
Next to the sata connector..
Gillbert said about ground..so you are right !
I thought it's my solder..but not...it's directly the adaptor !
So if you adaptor doesn't work..check the ground solder !!
Is-it possible to hidden "Hidden files and folders" ?
Because with hard disk there is
"Recycle.bin" and "System Volume Information" in Iso_Loader.
Thank you!
(04.12.2016 21:06)dragoncity писал(а): [ -> ]Is-it possible to hidden "Hidden files and folders" ?
Because with hard disk there is "Recycle.bin" and "System Volume Information" in Iso_Loader.
Just delete those folders on Windows with "shift + del".
(05.12.2016 07:33)Gillbert писал(а): [ -> ] (04.12.2016 21:06)dragoncity писал(а): [ -> ]Is-it possible to hidden "Hidden files and folders" ?
Because with hard disk there is "Recycle.bin" and "System Volume Information" in Iso_Loader.
Just delete those folders on Windows with "shift + del".
Doesn't work...
I know shit+del :-)
But it's system folder,and it's impossible to delete