I bought 2 adaptaters each times,so I don't think.
And you can see in my video,with the last adapter (old post),NO PROBLEM,works perfectly!
I don't know if you remember,but with some hard disk IDE,I have the same problem...
So there is a blockage...software blockage...no hardware !
(29.04.2016 11:47)dragoncity писал(а): [ -> ]Strange,For me it works 2 times..and now don't want to work ! :/
I format in FAT 32 with 16 32 and 64 clusters..but nothing.
So I order a new micro sd for test
Edit:
So I received my new "micro sd",and it's the same!
It's block at this screen :
If you remember, I had the same screen with some IDE drives.
Is-it possible to force in "Exfat"?
I know you don't have the solution "Swat",but maybe an other..
I never test REZ,but I will test and And I will give my return here.
Good job
Edit: I tested on my Dreamcast JAP
Just remove "true" and launch..works !!
SO..BIG RESUME for problem to solve... 117 Posts .. no less ^^
1 - PRESETS
With IDE problem,need to slow down check preset please
You can see my last video,with SD (Serial Port) .and games on IDE..no problem.
2 - BOOT HARD DISK
This screen appear with Adaptor CF>SD or Hard disk IDE with LBA28.
But it's not LBA 28...
Because with this Adaptor (IDE>CF),I don't have problem !
Adaptator (CF>IDE 'GOOD')
Adaptator (CF>IDE 'NOT GOOD')
So for me it's a problem software,dreamshell can't boot some Adaptor with disk LBA28...so need to change boot software
CF Lexar (official) + Adaptator (CF>IDE 'GOOD') : OK
CF>MicroSD + Adaptator (CF>IDE 'GOOD') : OK
CF Lexar (official) + Adaptator (CF>IDE 'NOT GOOD') : OK CF>MicroSD + Adaptator (CF>IDE 'NOT GOOD') : KO Hard Disk IDE LBA48 : OK Hard Disk IDE LBA28 : KO
3 - GdPlay
Many Games works..and some doesn't work.
Exemple :
But Star wars racer and Virtua Tennis for exemple reboot.
Soul Calibur black screen with RGB or VGA.
1) error in g1ata driver >> OK..just fix ^^
2) error in g1ata driver >> OK..the same ^^
3) ????? >> Try Star wars racer and Virtua Tennis in PAL (CDI)
4) how created region chenger mod? >> I don't understand
I tested REZ on my Dreamcast JAP
GDI OPT
Just remove "true" and launch..works !!
Edit: Works directly,not need to remove true !!
For the moment doesn't work in my Dreamcast PAL !
What is the memory for Dreamcast PAL...if it's works on Dreamcast JAP..?
1) need find this error
2) the same
3) I not know why it's don't work. Please test: run DS -> insert Star wars racer -> run GdPlay -> switch to original BIOS -> click play
4) what is solution you use for make your mod