27.09.2016, 20:01
01.10.2016, 12:18
(27.09.2016 20:01)megavolt85 писал(а): [ -> ]no... backup work with original bios with gdplay?
Backup work with original bios...bios SEGA...with gdplay...
Heu..it's impossible to launch gdplay with original bios...no..?
>>
I launch dreamshell,I put my backup...I launch gdplay..doesn't work..that's all..
23.10.2016, 17:52
(28.04.2016 12:09)dragoncity писал(а): [ -> ]Hi Swat,Why are you using CompactFlash? Does it have any benefits in speed?
With this adaptateur (CF > SD),I have sometimes problem.
At the beginning I have "Can't read MBR from IDE by LBA"..have you a solution..?
(I tested with 4 SD different and 1 microSD,and either it blocks like disk IDE with my precedents posts,or either it show "can't read...)
With this no problem,works perfectly:
Thank you !
Edit:
For Dino Crisis I think it's not possible to have kinematic in VGA so
I am going to watch on youtube I think.
But,is it possible to force Analog for the pad..?
Because with D-Pad it's boring...
23.10.2016, 17:55
To keep my gdrom, and I can change the game very easily by removing the card.
And there is nothing outside like an hard disk.
Loot at that
And there is nothing outside like an hard disk.
Loot at that
24.10.2016, 12:32
(23.10.2016 17:52)crystallize писал(а): [ -> ]Why are you using CompactFlash? Does it have any benefits in speed?
For CF card isn't need extra power supply, it's more compact and lightweight for usage.
In general no benefits in speed it's works like HDD.
29.10.2016, 02:15
So this is my batch for convert easily many GDI in GDI OPT
Batch Optimize GDI
Put all your games GDI in the same folder.
Copy my "package" inside.
Launch Batch Optimize GDI.bat
Batch Optimize GDI
Put all your games GDI in the same folder.
Copy my "package" inside.
Launch Batch Optimize GDI.bat
29.10.2016, 18:41
So for remuse ^^
1 - Have you find a solution for :
-Shenmue 1 (black screen)
- F355 challenge (Freeze during the game)
- Fur Fighters (black screen)
- Kao the Kangaroo (Freeze during the game)
- Re-Volt (race no start)
2 - Have you find a solution to force VGA for :
- Bangai-o
- Iron Aces
- Jojos Bizarre Adventure
For Jojo's Adventure I found :
JoJos.Bizarre.Adventure.for.Matching.Service-RDC.cdi
- Skies of Arcadia
For SOA I found:
http://japanese-cake.livejournal.com/10761.html
Thank you
1 - Have you find a solution for :
-Shenmue 1 (black screen)
- F355 challenge (Freeze during the game)
- Fur Fighters (black screen)
- Kao the Kangaroo (Freeze during the game)
- Re-Volt (race no start)
2 - Have you find a solution to force VGA for :
- Bangai-o
- Iron Aces
- Jojos Bizarre Adventure
For Jojo's Adventure I found :
JoJos.Bizarre.Adventure.for.Matching.Service-RDC.cdi
- Skies of Arcadia
For SOA I found:
http://japanese-cake.livejournal.com/10761.html
Thank you
30.10.2016, 12:05
(29.10.2016 02:15)dragoncity писал(а): [ -> ]So this is my batch for convert easily many GDI in GDI OPTOn which version of Windows have you tested it? It works kinda right on WinXP when I put your bat and your folder in some other folder, and then I create a separate folder for the game files right next to your stuff. I put all these gdi raw and bin in this separate folder and launch your bat. Console window goes like "cyclic copying is impossible", then it works kinda right and then says ""gdi_optimize.bat"" isn't a commant or a file, and then it deleted your "Optimize GDI" folder for some reason and finished.
Batch Optimize GDI
Put all your games GDI in the same folder.
Copy my "package" inside.
Launch Batch Optimize GDI.bat
30.10.2016, 12:23
I don't know for windows xp...
So for be sure,
Create a folder TEST
Copy my package inside
Copy all your folders in gdi inside
Exemple:
C:\TEST\Batch Optimize GDI.bat
C:\TEST\Optimize GDI
C:\TEST\Game1
C:\TEST\Game2
etc...
So for be sure,
Create a folder TEST
Copy my package inside
Copy all your folders in gdi inside
Exemple:
C:\TEST\Batch Optimize GDI.bat
C:\TEST\Optimize GDI
C:\TEST\Game1
C:\TEST\Game2
etc...
30.10.2016, 13:05
(30.10.2016 12:23)dragoncity писал(а): [ -> ]I don't know for windows xp...Log:
So for be sure,
Create a folder TEST
Copy my package inside
Copy all your folders in gdi inside
Exemple:
C:\TEST\Batch Optimize GDI.bat
C:\TEST\Optimize GDI
C:\TEST\Game1
C:\TEST\Game2
etc...
http://imgur.com/a/IyWih
Result:
http://imgur.com/a/eLE7H
result2:
http://imgur.com/a/Mrsrj
30.10.2016, 13:07
Perfect
30.10.2016, 14:07
So this is how it's supposed to work?
Yes it's work,i am sure with your photos.
Why did you programmed it to delete "Optimize GDI" folder?
Simply because after you do need it more
This makes no sense. And will I need ALL the files from Game1 folder?
Yes...just copy the folder on you hard disk..and launch..
Just for "this makes no sense",if you are not happy,do your script !!!
I share..but I am not obliged !
For me it's important this script for simplify,because when you must test 28 games in GDI,and in GDI OPT...
You must copy each times the folder sys..and optimize_gdi.bat..in each folder..and launch optimize_gdi.bat...and remove sys and optimize_gdi.bat in each folder...
But if you speak like this with me,do your script!
Yes it's work,i am sure with your photos.
Why did you programmed it to delete "Optimize GDI" folder?
Simply because after you do need it more
This makes no sense. And will I need ALL the files from Game1 folder?
Yes...just copy the folder on you hard disk..and launch..
Just for "this makes no sense",if you are not happy,do your script !!!
I share..but I am not obliged !
For me it's important this script for simplify,because when you must test 28 games in GDI,and in GDI OPT...
You must copy each times the folder sys..and optimize_gdi.bat..in each folder..and launch optimize_gdi.bat...and remove sys and optimize_gdi.bat in each folder...
But if you speak like this with me,do your script!
30.10.2016, 16:38
(29.10.2016 02:15)dragoncity писал(а): [ -> ]So this is my batch for convert easily many GDI in GDI OPT
Batch Optimize GDI
Put all your games GDI in the same folder.
Copy my "package" inside.
Launch Batch Optimize GDI.bat
Thanks for sharing
I tested on my WinXP machine, it gave me the same error messagens that @crystallize reported, but it worked fine in the end
Thanks for that, very handy tool for optimizing lots of GDIs with just one click
30.10.2016, 16:42
Thank you
Yes in fact it's normal
Because the script copy the folder sys and optimize_gdi.bat inside all folders..and in the folder Optimize GDI..but there is already this folder and this file..so it say this message ^^
I think it's possible to improve my script to remove this message
Yes in fact it's normal
Because the script copy the folder sys and optimize_gdi.bat inside all folders..and in the folder Optimize GDI..but there is already this folder and this file..so it say this message ^^
I think it's possible to improve my script to remove this message
30.10.2016, 17:49
(30.10.2016 14:07)dragoncity писал(а): [ -> ]Just for "this makes no sense",if you are not happy,do your script !!!Sorry, I didn't mean to be rude. Actually you did a great work and I should be bery thankful for you for authomating this process.
I share..but I am not obliged !
30.10.2016, 20:39
(30.10.2016 17:49)crystallize писал(а): [ -> ](30.10.2016 14:07)dragoncity писал(а): [ -> ]Just for "this makes no sense",if you are not happy,do your script !!!Sorry, I didn't mean to be rude. Actually you did a great work and I should be bery thankful for you for authomating this process.
I share..but I am not obliged !
OK
If you find a solution for me..
1 - Have you find a solution for :
-Shenmue 1 (black screen)
- F355 challenge (Freeze during the game)
- Fur Fighters (black screen)
- Kao the Kangaroo (Freeze during the game)
- Re-Volt (race no start)
2 - Have you find a solution to force VGA for :
- Bangai-o
- Iron Aces
30.10.2016, 21:08
-Shenmue 1 (black screen) - don't work for all, need research and rewrite loader
30.10.2016, 21:12
Yes..I wait.. :/
I try to have Dino Crisis Full VGA in French.
There is always in EN.
So I used (gdi2data.bat) for extract the gdi,and after I modified the 1ST_READ.BIN..but now..how can I repack the gdi ?
Because if I use (repack_gdi.bat),there is just an ISO (isoldr_game.iso)..I think it's for SD...I am not sure.
But I would like repack my GDI with the modification of 1ST_READ.BIN.
Thank you
I try to have Dino Crisis Full VGA in French.
There is always in EN.
So I used (gdi2data.bat) for extract the gdi,and after I modified the 1ST_READ.BIN..but now..how can I repack the gdi ?
Because if I use (repack_gdi.bat),there is just an ISO (isoldr_game.iso)..I think it's for SD...I am not sure.
But I would like repack my GDI with the modification of 1ST_READ.BIN.
Thank you
30.10.2016, 21:25
look video 2, use lba 45000
30.10.2016, 21:27
I found a solution 2minutes ago
http://x-community.grafbb.com/t1625-aide...pres-patch
So I try to replace the "1ST_READ.BIN" patch EN...in my GDI French...maybe it works..or maybe no
Edit: Doesn't work..erf it's always in english..
it's more complicated than I thought ..
I do not know to change the file ""1ST_READ.BIN" for full vga
http://x-community.grafbb.com/t1625-aide...pres-patch
So I try to replace the "1ST_READ.BIN" patch EN...in my GDI French...maybe it works..or maybe no
Edit: Doesn't work..erf it's always in english..
it's more complicated than I thought ..
I do not know to change the file ""1ST_READ.BIN" for full vga