Hardware → NAOMI CN2 to Dreamcast and AW BBA/Modem
This article describes a direct wiring connection between a standard Sega Dreamcast expansion (G2) port devices (like Modem, Broadband Adapter or LAN adapter) and the CN2 connector on the Sega NAOMI and NAOMI 2 motherboards.
Also included connection mapping for Atomiswave Broadband Adapter.
Читать дальше
Hardware → NAOMI G1-ATA (IDE) adapter for CN1 connector
This article describes a direct wiring connection between a standard IDE connector and the CN1 connector on the Sega NAOMI and NAOMI 2 motherboards.
Prepare in advance for the release of DreamShell 4.0.4 ;-)
Читать дальше
Prepare in advance for the release of DreamShell 4.0.4 ;-)
Читать дальше
Hardware → G1-ATA (IDE) adapter
This is a first version of G1-ATA adapter.
The printed circuit board is provided with small errors in size, so if you can draw yourself, do it better.
Or you can wait the new version of PCB from OzOnE.
And of course you can solder wires directly to the motherboard.
You can use IDE HDD (need external power) or CompactFlash cards (powered from DC).
Maybe some adapters IDE->SATA/SD etc will work too, but this is not guaranteed.
Prepare in advance for release DreamShell 4.0 RC 2 ;-)
Читать дальше
The printed circuit board is provided with small errors in size, so if you can draw yourself, do it better.
Or you can wait the new version of PCB from OzOnE.
And of course you can solder wires directly to the motherboard.
You can use IDE HDD (need external power) or CompactFlash cards (powered from DC).
Maybe some adapters IDE->SATA/SD etc will work too, but this is not guaranteed.
Prepare in advance for release DreamShell 4.0 RC 2 ;-)
Читать дальше
